← Back to jobsJob ID col-cmvaf4qyv0rdvrz01d4sjih8w

Invariant CorporationPosted 30+ days ago

Electrical Engineer

Full-time
Remote
8+ years
Competitive
Posted 30+ days ago

Invariant Corporation is a defense contractor providing advanced engineering solutions for national defense, homeland security, and law enforcement. The Electrical Engineer will lead the electrical engineering effort for complex defense programs, owning electrical architecture from concept through fielded configuration and supporting integration, testing, qualification, and deployment. The role also involves designing electrical systems, coordinating with multidisciplinary teams, troubleshooting issues, and ensuring requirements traceability and design reliability.

Posted
30+ Days Ago
Source
ziprecruiter.com
Sector
Electrical Engineering

Opens the employer's application page in a new tab

Responsibilities

  • Develop and control the programs top-level electrical design approach, including power architecture, interconnect strategy, grounding/bonding, signal integrity, interfaces
  • Lead electro-mechanical integration, and subsystem electrical allocations
  • Oversee the design, development, and testing of PCBs and FPGA-based systems ensuring project milestones are met on time and within budget
  • Partner closely with systems, mechanical, software, test, manufacturing, and quality teams to ensure the electrical design is not developed in isolation, but is fully aligned to packaging, thermal, timing, controls, ordnance interface, and mission performance constraints
  • Participate in failure analysis, root cause determination, and corrective actions
  • Design and review cable and harness assemblies for use in military systems, including proper shielding, grounding, and connector selection
  • Support and optimize engineering processes, procedures, and best practices to ensure consistent quality and reliability
  • Drive development of electrical requirements, interface definitions, schematics, cable/harness designs, ICDs, and design standards, ensuring full traceability from mission need to implementation and verification
  • Act as a key advisor on electronic design and system integration challenges
  • Familiarity with lab test environment and equipment such as, but not limited to DMMs, oscilloscopes, function/pulse generators, power supplies and spectrum analyzers
  • Support customer data administration by ensuring accuracy of Manufacturer Lists (AML), Bills of Materials (BOM), and complex Engineering Change Orders (ECO) into PLM systems

Qualifications

  • 8+ years of hands-on experience in electrical engineering roles, including system integration, verification testing, and circuit/cable/harness design for rugged military environments
  • Bachelors degree in Electrical Engineering or related field
  • Minimum secret security clearance or ability to obtain one
  • At least 8+ years of experience in electrical engineering roles supporting DoW or aerospace systems
  • Proficiency with NFPA 70/NEC, ASME Y14.100 and generating detailed documentation of cable assemblies and electromechanical equipment, including test set and breakout boxes
  • Demonstrated experience with verification testing to MIL-STD-464, MIL-STD-810, and similar specifications
  • Hands-on experience with system integration and test at the platform or subsystem level
  • Working knowledge of circuit, cable, and harness design, including familiarity with drawings, wire selection, shielding, military connectors, circuit theory, signal processing, and embedded systems
  • Proficiency in test instrumentation, data acquisition, and troubleshooting tools
  • Strong documentation and communication skills
  • Ability to work both independently and in a collaborative team environment
  • Strong attention to detail and problem-solving skills
  • Experience in Altium, AutoCAD, MS Office Suite and Document Management Systems (EDMS)
  • Excellent verbal and written skills for cross-functional coordination within engineering
  • Ability to troubleshoot data inaccuracies and process bottlenecks
  • Experience with government programs, projects, or platforms
  • Knowledge of responsibilities and tasks performed by various engineering departments/disciplines (e.g., design, test, software, technology, avionics) and understanding of how their products/processes affect one another and impact non-engineering processes (e.g., operations, logistics, business)

Preferred

  • Experience with 40MM grenades and Mk19 Grenade Launchers
  • Experience with the Common Remotely Operated Weapon System (CROWS)
  • C-UxS domain knowledge
  • 40mm Grenade Experience
  • Mk19 Grenade Launcher Experience
  • CROWS Experience

Required skills

Secret Security ClearanceNFPA 70/NECASME Y14.100MIL-STD-464 Verification TestingMIL-STD-810 Verification TestingSignal ProcessingEmbedded SystemsAltiumAutoCAD

Full job description

Invariant Corporation is a defense contractor providing advanced engineering solutions for national defense, homeland security, and law enforcement. The Electrical Engineer will lead the electrical engineering effort for complex defense programs, owning electrical architecture from concept through fielded configuration and supporting integration, testing, qualification, and deployment. The role also involves designing electrical systems, coordinating with multidisciplinary teams, troubleshooting issues, and ensuring requirements traceability and design reliability.

Responsibilities

  • Develop and control the programs top-level electrical design approach, including power architecture, interconnect strategy, grounding/bonding, signal integrity, interfaces
  • Lead electro-mechanical integration, and subsystem electrical allocations
  • Oversee the design, development, and testing of PCBs and FPGA-based systems ensuring project milestones are met on time and within budget
  • Partner closely with systems, mechanical, software, test, manufacturing, and quality teams to ensure the electrical design is not developed in isolation, but is fully aligned to packaging, thermal, timing, controls, ordnance interface, and mission performance constraints
  • Participate in failure analysis, root cause determination, and corrective actions
  • Design and review cable and harness assemblies for use in military systems, including proper shielding, grounding, and connector selection
  • Support and optimize engineering processes, procedures, and best practices to ensure consistent quality and reliability
  • Drive development of electrical requirements, interface definitions, schematics, cable/harness designs, ICDs, and design standards, ensuring full traceability from mission need to implementation and verification
  • Act as a key advisor on electronic design and system integration challenges
  • Familiarity with lab test environment and equipment such as, but not limited to DMMs, oscilloscopes, function/pulse generators, power supplies and spectrum analyzers
  • Support customer data administration by ensuring accuracy of Manufacturer Lists (AML), Bills of Materials (BOM), and complex Engineering Change Orders (ECO) into PLM systems

Preferred

  • Experience with 40MM grenades and Mk19 Grenade Launchers
  • Experience with the Common Remotely Operated Weapon System (CROWS)
  • C-UxS domain knowledge
  • 40mm Grenade Experience
  • Mk19 Grenade Launcher Experience
  • CROWS Experience
  • C-UxS Domain Knowledge

Benefits

  • Remote work option
  • 100% employee-owned company, allowing employees to share in the success of the company and build ownership in their work

Company

  • Defense engineering and software development for mission-critical systems
  • Huntsville, Alabama, USA
  • https://www.invariant-corp.com/
  • Founded in 2001
  • 201-500 employees

Qualifications

  • 8+ years of hands-on experience in electrical engineering roles, including system integration, verification testing, and circuit/cable/harness design for rugged military environments
  • Bachelors degree in Electrical Engineering or related field
  • Minimum secret security clearance or ability to obtain one
  • At least 8+ years of experience in electrical engineering roles supporting DoW or aerospace systems
  • Proficiency with NFPA 70/NEC, ASME Y14.100 and generating detailed documentation of cable assemblies and electromechanical equipment, including test set and breakout boxes
  • Demonstrated experience with verification testing to MIL-STD-464, MIL-STD-810, and similar specifications
  • Hands-on experience with system integration and test at the platform or subsystem level
  • Working knowledge of circuit, cable, and harness design, including familiarity with drawings, wire selection, shielding, military connectors, circuit theory, signal processing, and embedded systems
  • Proficiency in test instrumentation, data acquisition, and troubleshooting tools
  • Strong documentation and communication skills
  • Ability to work both independently and in a collaborative team environment
  • Strong attention to detail and problem-solving skills
  • Experience in Altium, AutoCAD, MS Office Suite and Document Management Systems (EDMS)
  • Excellent verbal and written skills for cross-functional coordination within engineering
  • Ability to troubleshoot data inaccuracies and process bottlenecks
  • Experience with government programs, projects, or platforms
  • Knowledge of responsibilities and tasks performed by various engineering departments/disciplines (e.g., design, test, software, technology, avionics) and understanding of how their products/processes affect one another and impact non-engineering processes (e.g., operations, logistics, business)
  • Experience with 40MM grenades and Mk19 Grenade Launchers
  • Experience with the Common Remotely Operated Weapon System (CROWS)
  • C-UxS domain knowledge
  • 8+ years of hands-on experience in electrical engineering roles, including system integration, verification testing, and circuit/cable/harness design for rugged military environments.
  • At least 8+ years of experience in electrical engineering roles supporting DoW or aerospace systems.

Required skills

  • Electrical Engineering for DoD or Aerospace Systems, Secret Security Clearance, Circuit, Cable, and Harness Design, System Integration and Verification Testing, NFPA 70/NEC, ASME Y14.100, MIL-STD-464 Verification Testing, MIL-STD-810 Verification Testing, Signal Processing, Embedded Systems, Altium, AutoCAD

Preferred skills

  • Experience with 40MM grenades and Mk19 Grenade Launchers, C-UxS domain knowledge

Experience

  • 8+ years

Job details

Employment type

Full-time

Seniority level

8+ years

Date posted

Jul 2, 2026

Work mode

Remote

Job source

ziprecruiter.com

Company

Invariant Corporation

Electrical Engineering

Defense engineering and software development for mission-critical systems

  • Huntsville, Alabama, USA
  • Electrical Engineering
  • 201-500 employees
  • Founded 2001
  • invariant-corp.com

Similar jobs

Matched on role, skills and location · live jobs only

See more Electrical Engineer jobs

Onward Energy

5d ago

Electrical Engineer - Power Generation

Full-timeRemoteUnited States$125K – $140K/yr

Responsibilities Reviews plant trip events using relay records, COMTRADE files, and plant reports to diagnose the cause of the issue and recommends actions to restore availability Provides real-time, interactive technical support to sites during events,…

Why similarSame roleRemote

Northwood

2d ago

New

Senior Supplier Quality Engineer, Electrical

Full-timeOn-siteTorrance, CA$109K – $160K/yr

Northwood is a space infrastructure company developing communications systems for satellite missions. The Senior Supplier Quality Engineer will establish supplier quality processes, develop and qualify suppliers, and partner with engineering and operations to…

Why similarSame role

DiClemente Siegel Design Inc.

5d ago

Electrical Power System Engineer

Full-timeOn-siteSouthfield, MICompetitive

DiClemente Siegel Design Inc. is hiring an Electrical Power Systems Engineer to lead electrical power system design across its projects.

Why similarSame role

Get new Electrical Engineer jobs by email

Create job alert

Electrical Engineer

Invariant Corporation · Competitive

Apply on company site