← Back to jobsJob ID col-cmwjqk4lu0kcs89hqh5g0p87l

WSP in the U.S.Posted 6 days ago

High Voltage Power Systems Engineer

Full-time
On-site
3–5 years
Competitive
Posted 6 days ago

WSP brings global expertise in power delivery, power generation, and program management, supporting clients as energy systems evolve. The High Voltage Power Systems Engineer will support the ESSP Team by performing electrical studies, SCADA, and system protection services for generation facilities, substations, transmission systems, and distribution systems. The role includes power system analysis, design studies, networking and communications, logic and control systems, technical reporting, and project support.

Posted
6 days ago
Source
emit.fa.ca3.oraclecloud.com
Sector
Energy/Environmental

Opens the employer's application page in a new tab

Responsibilities

  • Protective Relaying: short circuit and symmetrical component analysis, time-current coordination, protection scheme and criteria development, relay settings calculation, integration with SCADA systems, NERC compliance, and arc flash analysis. Applicable software: AcSELerator Quickset (SEL-5030), AcSELerator Architect, GE EnerVista, ASPEN OneLiner, Gridscale X (CAPE), SKM-PTW, ETAP, RSCAD/RTDS
  • Power System Planning Studies: steady-state real and reactive power flow including outage contingencies, generation interconnect feasibility, P-V and Q-V analysis for voltage stability margins, dynamic stability performance, automation of large batch simulations, working with models from NERC regional entities (WECC, MRO, SERC etc.), NERC compliance. Applicable Software: PSS/E, PSLF, PowerWorld, DSA Tools, Python Scripting
  • Design Studies: substation grounding, corona, electric and magnetic fields, insulation coordination (lightning, switching surge, and contamination performance), transient (time domain) simulation, power quality (harmonics, voltage flicker, over/under voltage, etc.), motor starting, AC interference (transmission line interaction with railroads and pipelines). Applicable Software: CDEGS, ATP-EMTP, PSCAD, POLARIS-EMF, COMSOL Multiphysics, TFlash
  • Networking and Communications: design and configure network and communication paths for Remote Terminal Units (RTUs), protective relays, meters, Human Machine Interface (HMIs), PLC’s and other SCADA system equipment; develop basic specifications for fiber optic, microwave, power line carrier, or radio communication paths; travel to project sites to troubleshoot and commission network and communication systems. Applicable network and communication protocols: DNP, Modbus, SEL Communication Protocol, Goose Messaging, IEC 61850
  • Logic and Control Systems: develop and implement logic and control schemes for remote and local operation of power system equipment; develop programs on various platforms for implementation of these schemes; travel to project sites to test and commission the control schemes. Applicable Logic and Control Platforms: SEL RTAC, Orion, Cooper SMP, GE-D20
  • Write technical reports summarizing analysis with findings and conclusions, generating complete, accurate, and concise documentation using sketches, calculations, electronic systems, spreadsheets, and software
  • Assist technical staff and project managers with risk identification and assessment, offering input and analysis with design concepts, construction, mitigation and improvement activities, and remediation projects
  • Assist with work plan preparation and coordination of field/site work and permitting
  • Complete training on assigned tasks
  • Perform additional responsibilities as required by business needs
  • Exercise responsible and ethical decision-making regarding company funds, resources, and conduct, and adhere to WSP’s Code of Conduct and related policies and procedures

Qualifications

  • BSEE (BS Electrical Engineering), BSEET (BS Electrical Engineering Technology), or BSCE (BS Computer Engineering) degree, from an ABET-accredited university
  • 3 to 5 years of industry experience performing design or device configuration in technical disciplines described in the Roles and Responsibilities section
  • Knowledge of electrical engineering principles, practices, process, design/build, and the application to permitting and project work-related issues
  • Analytical mindset with an ability to exercise sound judgement in evaluating situations and making decisions
  • Strong interpersonal and communication skills when interacting with others, expressing ideas effectively and professionally to an engineering and non-engineering audience
  • Capable self-leadership with attention to detail, accuracy, multi-tasking, and prioritization of responsibilities in a dynamic work environment
  • Ability to work independently with minimal supervision, as well as part of a team to meet business objectives
  • Basic proficiency with technical writing, office automation, software, technology, math principles, predictive models, spreadsheets, and tools
  • Proven track record of upholding workplace safety and ability to abide by WSP's health, safety and drug/alcohol and harassment policies
  • Ability to work schedules conducive to project-specific requirements that may extend beyond the typical workweek
  • Occasional travel may be required depending on project-specific requirements
  • Relocation assistance is not available for this position

Preferred

  • Power system courses covering topics such as three-phase power, load flow and reactive compensation, protective relaying, symmetrical components, transmission line theory, power system transients, dynamic stability, and power system electromagnetics
  • Internships and experience in technical areas and software listed in the Job Description section
  • Engineer In Training (EIT) certification, with the expectation to work toward professional engineering registration (PE)
  • Experience in mentoring others and/or providing technical leadership in customer-focused engineering projects
  • A member of and/or actively participates in professional practice organizations
  • Engineer In Training certification

Required skills

Dynamic StabilityElectrical Engineering PrinciplesPower Flow AnalysisPower System ElectromagneticsPower System FundamentalsPower System TransientsProtective RelayingSymmetrical ComponentsThree-Phase Power

Full job description

WSP brings global expertise in power delivery, power generation, and program management, supporting clients as energy systems evolve. The High Voltage Power Systems Engineer will support the ESSP Team by performing electrical studies, SCADA, and system protection services for generation facilities, substations, transmission systems, and distribution systems. The role includes power system analysis, design studies, networking and communications, logic and control systems, technical reporting, and project support.

Responsibilities

  • Protective Relaying: short circuit and symmetrical component analysis, time-current coordination, protection scheme and criteria development, relay settings calculation, integration with SCADA systems, NERC compliance, and arc flash analysis. Applicable software: AcSELerator Quickset (SEL-5030), AcSELerator Architect, GE EnerVista, ASPEN OneLiner, Gridscale X (CAPE), SKM-PTW, ETAP, RSCAD/RTDS
  • Power System Planning Studies: steady-state real and reactive power flow including outage contingencies, generation interconnect feasibility, P-V and Q-V analysis for voltage stability margins, dynamic stability performance, automation of large batch simulations, working with models from NERC regional entities (WECC, MRO, SERC etc.), NERC compliance. Applicable Software: PSS/E, PSLF, PowerWorld, DSA Tools, Python Scripting
  • Design Studies: substation grounding, corona, electric and magnetic fields, insulation coordination (lightning, switching surge, and contamination performance), transient (time domain) simulation, power quality (harmonics, voltage flicker, over/under voltage, etc.), motor starting, AC interference (transmission line interaction with railroads and pipelines). Applicable Software: CDEGS, ATP-EMTP, PSCAD, POLARIS-EMF, COMSOL Multiphysics, TFlash
  • Networking and Communications: design and configure network and communication paths for Remote Terminal Units (RTUs), protective relays, meters, Human Machine Interface (HMIs), PLC’s and other SCADA system equipment; develop basic specifications for fiber optic, microwave, power line carrier, or radio communication paths; travel to project sites to troubleshoot and commission network and communication systems. Applicable network and communication protocols: DNP, Modbus, SEL Communication Protocol, Goose Messaging, IEC 61850
  • Logic and Control Systems: develop and implement logic and control schemes for remote and local operation of power system equipment; develop programs on various platforms for implementation of these schemes; travel to project sites to test and commission the control schemes. Applicable Logic and Control Platforms: SEL RTAC, Orion, Cooper SMP, GE-D20
  • Write technical reports summarizing analysis with findings and conclusions, generating complete, accurate, and concise documentation using sketches, calculations, electronic systems, spreadsheets, and software
  • Assist technical staff and project managers with risk identification and assessment, offering input and analysis with design concepts, construction, mitigation and improvement activities, and remediation projects
  • Assist with work plan preparation and coordination of field/site work and permitting
  • Complete training on assigned tasks
  • Perform additional responsibilities as required by business needs
  • Exercise responsible and ethical decision-making regarding company funds, resources, and conduct, and adhere to WSP’s Code of Conduct and related policies and procedures
  • Perform additional responsibilities as required by business needs

Preferred

  • Power system courses covering topics such as three-phase power, load flow and reactive compensation, protective relaying, symmetrical components, transmission line theory, power system transients, dynamic stability, and power system electromagnetics
  • Internships and experience in technical areas and software listed in the Job Description section
  • Engineer In Training (EIT) certification, with the expectation to work toward professional engineering registration (PE)
  • Experience in mentoring others and/or providing technical leadership in customer-focused engineering projects
  • A member of and/or actively participates in professional practice organizations
  • Power system courses
  • Three-phase power
  • Load flow
  • Reactive compensation
  • Protective relaying
  • Symmetrical components
  • Transmission line theory
  • Power system transients
  • Dynamic stability
  • Power system electromagnetics
  • Engineer In Training certification
  • Customer-focused engineering
  • Mentoring others
  • Technical leadership

Benefits

  • Medical coverage
  • Dental coverage
  • Vision coverage
  • Disability coverage
  • Life insurance coverage
  • Retirement savings
  • Paid sick leave
  • Paid vacation or other personal time
  • Paid parental leave
  • Paid time off for bereavement, voting, and/or attendance at naturalization proceedings

Company

  • Professional services consulting for built and natural environments
  • Montreal, Quebec, CAN
  • https://www.wsp.com/en-us
  • Founded in 1980
  • 10001+ employees

Qualifications

  • BSEE (BS Electrical Engineering), BSEET (BS Electrical Engineering Technology), or BSCE (BS Computer Engineering) degree, from an ABET-accredited university
  • 3 to 5 years of industry experience performing design or device configuration in technical disciplines described in the Roles and Responsibilities section
  • Knowledge of electrical engineering principles, practices, process, design/build, and the application to permitting and project work-related issues
  • Analytical mindset with an ability to exercise sound judgement in evaluating situations and making decisions
  • Strong interpersonal and communication skills when interacting with others, expressing ideas effectively and professionally to an engineering and non-engineering audience
  • Capable self-leadership with attention to detail, accuracy, multi-tasking, and prioritization of responsibilities in a dynamic work environment
  • Ability to work independently with minimal supervision, as well as part of a team to meet business objectives
  • Basic proficiency with technical writing, office automation, software, technology, math principles, predictive models, spreadsheets, and tools
  • Proven track record of upholding workplace safety and ability to abide by WSP's health, safety and drug/alcohol and harassment policies
  • Ability to work schedules conducive to project-specific requirements that may extend beyond the typical workweek
  • Occasional travel may be required depending on project-specific requirements
  • Relocation assistance is not available for this position
  • Power system courses covering topics such as three-phase power, load flow and reactive compensation, protective relaying, symmetrical components, transmission line theory, power system transients, dynamic stability, and power system electromagnetics
  • Internships and experience in technical areas and software listed in the Job Description section
  • Engineer In Training (EIT) certification, with the expectation to work toward professional engineering registration (PE)
  • Experience in mentoring others and/or providing technical leadership in customer-focused engineering projects
  • A member of and/or actively participates in professional practice organizations

Required skills

  • Dynamic Stability, Electrical Engineering Principles, Engineer in Training (EIT) Certification, Power Flow Analysis, Power System Electromagnetics, Power System Fundamentals, Power System Transients, Protective Relaying, Symmetrical Components, Three-Phase Power

Experience

  • 3-5 years

Job details

Employment type

Full-time

Seniority level

3–5 years

Date posted

Nov 14, 2026

Work mode

On-site

Job source

emit.fa.ca3.oraclecloud.com

Company

WSP in the U.S.

Energy/Environmental

Professional services consulting for built and natural environments

See all 10 jobs from WSP in the U.S. →
  • Fort Worth, TX
  • Energy/Environmental
  • 10001+ employees
  • Founded 1980
  • wsp.com

Similar jobs

Matched on role, skills and location · live jobs only

See more Power Systems Engineer jobs in Fort Worth

AVA Energy

4d ago

Power Systems Engineer

Full-timeRemoteUnited States$175K – $275K/yr

AVA Energy is partnering with an unnamed energy technology company seeking an experienced Power Systems Engineer. The role supports grid modeling, data integration, and simulation initiatives.

Why similarSame rolePower Flow AnalysisRemote

Strive Solutions

4d ago

Power Systems Engineer

Full-timeOn-siteBoston, MACompetitive

Strive Solutions is seeking a Power Systems Studies Lead to engineer high- and extra-high-voltage substations and grid interconnections.

Why similarSame rolePower Flow Analysis

Integer Technologies

4d ago

Senior Electrical Engineer - Power Systems

Full-timeRemoteUnited StatesCompetitive

Applied technology research and decision-support software for defense and industry Experience 8+ years

Why similarSame roleRemote

Get new Power Systems Engineer jobs in Fort Worth by email

Create job alert

High Voltage Power Systems Engineer

WSP in the U.S. · Competitive

Apply on company site