← Back to jobsJob ID col-cmwku6lu20mws89hq9swra0o4

Deringer-Ney Inc.Posted 4 days ago

Senior Quality Engineer

Full-time
On-site
5+ years
Competitive
Posted 4 days ago

Deringer-Ney Inc. is seeking a Senior Quality Engineer responsible for the application, troubleshooting, and maintenance of the company's quality system. The role involves coordinating projects, ensuring adherence to quality policies, conducting audits, and participating in design reviews to enhance product quality.

Posted
4 days ago
Source
workforcenow.adp.com
Sector
Marketing

Opens the employer's application page in a new tab

Responsibilities

  • Ensures that all employees understand and follow policies and procedures with regard to the Quality System and or company as they apply
  • Ensures maintenance and improvement of the Quality System through routine system audits and corrective actions
  • Plans activities and coordinates with other company resources to ensure assigned projects are being completed on a timely basis
  • Develops and prepares Quality Plans, sampling, and inspection procedures for manufacturing processes, including PPAP submissions, Validation documentation, MSA and any other product specific requirements as defined
  • Participate in product design reviews with primary responsibility for print review with an emphasis on tolerances, GD&T, and capability. Recommends appropriate sampling and inspection techniques
  • Works with inspection resources to develop appropriate inspection techniques and gaging to ensure accurate and repeatable results
  • Conducts process capability studies, design of experiments, gage R&R and other process, product, or equipment related studies as defined by the Quality Engineer Lead or Quality Manager
  • Participates nonconformance analysis and resolution, including communication to internal and external contacts as required
  • Lead and mentors Quality Engineers and Quality Engineering Technicians as needed
  • Carries out other general responsibilities as required by Quality Engineer Lead
  • Conduct supplier audits as required
  • Participate in various supplier quality improvement projects and activities as required
  • Participates in customer visits and acts as the company quality representative during complaint resolution internally or at customer sites as needed
  • Develops and analyzes statistical data and product specifications to determine conformance to customer specifications
  • Identifies new techniques, and technologies to be used in process control, inspection and calibration to improve quality, reduce inspection time and measurement error, and increase product throughput
  • Preparation of automotive PPAP submissions. Coordinates annual layouts, first article reports, MSA (gage R&R), CPK studies, DOEs, reliability studies and other special analysis as needed
  • Participates in product design reviews, new product quotes, and evaluation of print GD&T for manufacturability

Qualifications

  • Knowledge of ISO9001, ISO13485 and IATF16949 standards including internal auditing
  • Background in Quality Engineering, Metrology, and GD&T
  • Ability to handle multiple tasks with various levels of priority. Must be able to coordinate the requirements of daily production, Engineering, and Sales & Marketing with inspection services to achieve timely response to needs
  • Strong communication skills. Must be able to present ideas, results, and requirements effectively throughout the organization on a timely basis
  • Strong skills in applied statistics, reliability, Design of Experiments, MSA (gage R&R) and project management
  • Must have computer skills capable of utilizing various software packages commonly used in project management, databases, SPC, word processing and data acquisition
  • Well organized with strong interpersonal skills
  • Proficient in using systematic methodologies such as Six Sigma for continuous improvement
  • Bachelor's Degree, preferably BSME or higher, with minimum of 5 years of experience in quality in a metal stamping, injection molding or related industry, or equivalent experience
  • Strong project management and execution skill sets leading cross functional teams
  • Bachelor’s Degree, preferably BSME or higher, with minimum of 5 years of experience in quality in a metal stamping, injection molding or related industry, or equivalent experience.

Preferred

  • Knowledge of automated inspection equipment including Vision Systems with basic programming skills (desired)
  • Certified Quality Engineer, Manager or Auditor (desired). Actively continuing training through, courses and seminars (Desired)
  • Knowledge and proficiency in the areas of Six Sigma methodologies, PPAP, APQP, IP/OQ/PQ

Required skills

APQPApplied statisticsDesign of ExperimentsGD&TIATF16949IP/OQ/PQISO13485ISO9001MSA (gage R&R)MetrologyPPAPSix SigmaVision Systems programming

Full job description

Deringer-Ney Inc. is seeking a Senior Quality Engineer responsible for the application, troubleshooting, and maintenance of the company's quality system. The role involves coordinating projects, ensuring adherence to quality policies, conducting audits, and participating in design reviews to enhance product quality.

Responsibilities

  • Ensures that all employees understand and follow policies and procedures with regard to the Quality System and or company as they apply
  • Ensures maintenance and improvement of the Quality System through routine system audits and corrective actions
  • Plans activities and coordinates with other company resources to ensure assigned projects are being completed on a timely basis
  • Develops and prepares Quality Plans, sampling, and inspection procedures for manufacturing processes, including PPAP submissions, Validation documentation, MSA and any other product specific requirements as defined
  • Participate in product design reviews with primary responsibility for print review with an emphasis on tolerances, GD&T, and capability. Recommends appropriate sampling and inspection techniques
  • Works with inspection resources to develop appropriate inspection techniques and gaging to ensure accurate and repeatable results
  • Conducts process capability studies, design of experiments, gage R&R and other process, product, or equipment related studies as defined by the Quality Engineer Lead or Quality Manager
  • Participates nonconformance analysis and resolution, including communication to internal and external contacts as required
  • Lead and mentors Quality Engineers and Quality Engineering Technicians as needed
  • Carries out other general responsibilities as required by Quality Engineer Lead
  • Conduct supplier audits as required
  • Participate in various supplier quality improvement projects and activities as required
  • Participates in customer visits and acts as the company quality representative during complaint resolution internally or at customer sites as needed
  • Develops and analyzes statistical data and product specifications to determine conformance to customer specifications
  • Identifies new techniques, and technologies to be used in process control, inspection and calibration to improve quality, reduce inspection time and measurement error, and increase product throughput
  • Preparation of automotive PPAP submissions. Coordinates annual layouts, first article reports, MSA (gage R&R), CPK studies, DOEs, reliability studies and other special analysis as needed
  • Participates in product design reviews, new product quotes, and evaluation of print GD&T for manufacturability

Preferred

  • Knowledge of automated inspection equipment including Vision Systems with basic programming skills (desired)
  • Certified Quality Engineer, Manager or Auditor (desired). Actively continuing training through, courses and seminars (Desired)
  • Knowledge and proficiency in the areas of Six Sigma methodologies, PPAP, APQP, IP/OQ/PQ
  • Automated inspection equipment
  • Vision systems
  • Basic programming skills
  • Certified Quality Engineer
  • Quality Manager
  • Quality Auditor
  • Continuing training
  • Six Sigma methodologies
  • PPAP
  • APQP
  • IP/OQ/PQ

Company

  • Custom precious metal alloys and precision-engineered components manufacturer
  • Bloomfield, Connecticut, USA
  • http://www.deringerney.com/
  • Founded in 1812
  • 201-500 employees

Qualifications

  • Knowledge of ISO9001, ISO13485 and IATF16949 standards including internal auditing
  • Background in Quality Engineering, Metrology, and GD&T
  • Ability to handle multiple tasks with various levels of priority. Must be able to coordinate the requirements of daily production, Engineering, and Sales & Marketing with inspection services to achieve timely response to needs
  • Strong communication skills. Must be able to present ideas, results, and requirements effectively throughout the organization on a timely basis
  • Strong skills in applied statistics, reliability, Design of Experiments, MSA (gage R&R) and project management
  • Must have computer skills capable of utilizing various software packages commonly used in project management, databases, SPC, word processing and data acquisition
  • Well organized with strong interpersonal skills
  • Proficient in using systematic methodologies such as Six Sigma for continuous improvement
  • Bachelor's Degree, preferably BSME or higher, with minimum of 5 years of experience in quality in a metal stamping, injection molding or related industry, or equivalent experience
  • Strong project management and execution skill sets leading cross functional teams
  • Knowledge of automated inspection equipment including Vision Systems with basic programming skills (desired)
  • Certified Quality Engineer, Manager or Auditor (desired). Actively continuing training through, courses and seminars (Desired)
  • Knowledge and proficiency in the areas of Six Sigma methodologies, PPAP, APQP, IP/OQ/PQ
  • Bachelor’s Degree, preferably BSME or higher, with minimum of 5 years of experience in quality in a metal stamping, injection molding or related industry, or equivalent experience.

Required skills

  • APQP, Applied statistics, Design of Experiments, GD&T, IATF16949, IP/OQ/PQ, ISO13485, ISO9001, MSA (gage R&R), Metrology, PPAP, Six Sigma, Vision Systems programming

Experience

  • 5+ years

Job details

Employment type

Full-time

Seniority level

5+ years

Sector · Sub-sector

Marketing · Product Marketing

Date posted

Nov 17, 2026

Work mode

On-site

Job source

workforcenow.adp.com

Company

Deringer-Ney Inc.

Marketing

Custom precious metal alloys and precision-engineered components manufacturer

  • Bloomfield, Connecticut, USA
  • Marketing
  • 201-500 employees
  • Founded 1812
  • deringerney.com

Similar jobs

Matched on role, skills and location · live jobs only

See more Product Marketing jobs in Bloomfield

MiMedx

2d ago

New

Quality Control Technician

Full-timeOn-siteMarietta, GA$52K – $63K/yr

MiMedx develops regenerative biologics and tissue-based therapies. The Quality Control Technician performs release testing and inspections of materials and finished products, evaluates results against company and regulatory requirements, and supports quality…

Why similarSame role

Product Marketing Engineer

3d ago

Product Marketing Engineer | SR-WVB

Full-timeOn-siteDallas, TXCompetitive

Texas Instruments is seeking a Product Marketing Engineer to drive revenue growth for its 30–59V Wide VIN Buck product portfolio.

Why similarSame role

BeyondTrust

1d ago

New

Sr Analyst, Analytics & Insights

Full-timeRemoteUnited StatesCompetitive

BeyondTrust is hiring a Senior Analyst, Analytics & Insights to apply statistical modeling and forecasting to go-to-market questions across sales, marketing, partners, and customer success.

Why similarSame roleRemote

Get new Product Marketing jobs in Bloomfield by email

Create job alert

Senior Quality Engineer

Deringer-Ney Inc. · Competitive

Apply on company site