← Back to jobsJob ID col-cmwkuo2nu0nd589hqac06c5nt

EnergyPosted 4 days ago

Quality Engineer

Full-time
On-site
2–5 years
Competitive
Posted 4 days ago

BAC (Baltimore Aircoil Company, Inc.) is hiring a Quality Engineer to develop, implement, maintain, and continuously improve its quality management systems. The role focuses on manufacturing process controls, quality engineering, risk management, supplier quality, and cross-functional process improvement.

Posted
4 days ago
Source
recruiting2.ultipro.com
Sector
Education and Training

Opens the employer's application page in a new tab

Responsibilities

  • Develop and maintain process documentation, including Process Flow Diagrams, PFMEAs, Control Plans, Inspection Plans and Quality Procedures
  • Establish consistent methods for Process Control, verification, documentation and traceability
  • Support the development of Production Part Approval Process (PPAP), Production Quality Plans (PQP) and other customer-specific requirements as applicable
  • Ensure the quality controls are integrated throughout the manufacturing process
  • Support Internal and Third-Party audits including identification of gaps against the standard, Corrective Action response and implementation
  • Work directly with manufacturing and engineering to identify potential process risk and implement preventive controls
  • Evaluate manufacturing processes to identify sources of variation and opportunities for improvement
  • Investigate recurring manufacturing defects and develop sustainable corrective actions
  • Support process validation and new equipment validation as required (dry coil line)
  • Participate in New Product Introduction, engineering changes and manufacturing process changes to ensure quality requirements are incorporated in manufacturing
  • Conduct and coordinate Gage Repeatability & Reproducibility (Gage R&R) studies
  • Evaluate measurement methods, equipment suitability and measurement system variation
  • Establish a proper measurement and inspection method for critical characteristics
  • Support calibration system improvement and ensure measurement equipment is suitable for its intendent application
  • Establish measurement system acceptance criteria and recommend improvements when measurement reliability is inadequate
  • Develop and implement Statistical Process Control (SPC) methodologies when appropriate
  • Conduct process capability studies, including Cp & Cpk analysis when appropriate
  • Establish risk base incoming inspection methodologies
  • Define inspection criteria based on product criticality, supplier performance and customer requirements
  • Investigate supplier-related non-conformances and coordinate with Corporate the Supplier Corrective Action Response
  • Work with Supply chain and purchasing to develop supplier quality metrics and improvement initiatives
  • Support investigation and Resolution of internal and external nonconformances
  • Lead or facilitate root cause for significant or recurrent quality issues
  • Ensure Corrective Actions address root cause and not just symptoms
  • Evaluate effectiveness of implemented Corrective Actions
  • The individual will provide technical guidance to specialists, supervisors, inspectors and personnel in general and promote preventive quality practices and the philosophy that quality is built into the process
  • Participate in Manufacturing floor activities, continuous improvement activities and training activities to ensure effective implementation of quality controls

Qualifications

  • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Manufacturing Engineering, Quality Engineering, or related technical discipline
  • Equivalent combination of technical education and relevant quality manufacturing experience may be considered
  • 2-5 years' experience in quality engineering, manufacturing engineering or related quality function within a manufacturing environment
  • Knowledge in ISO9001 and audit support
  • Practical experience with PFMEA, Control Plans, Root Cause Analysis and Corrective Action methodologies
  • Experience with MSA and Gage R&R
  • Understandings of SPC, process capabilities (Cp / Cpk), PPAP and PQP
  • Experience with 8D and/or A3
  • Technical drawing interpretation (GD&T) with basic mechanical and electrical principles
  • Microsoft office particularly Excell and data analysis tools
  • 2-5 years’ experience in quality engineering, manufacturing engineering or related quality function within a manufacturing environment

Preferred

  • Experience with industrial equipment manufacturing mechanical assemblies, electrical controls, sheet metal fabrication, welding, power coating or similar manufacturing processes is preferred

Required skills

8DControl PlansCorrective ActionGD&TGage R&RISO 9001Measurement System Analysis (MSA)Microsoft ExcelPFMEAPPAPProcess Capability Analysis (Cp/Cpk)Root Cause AnalysisStatistical Process Control (SPC)Team Development

Full job description

BAC (Baltimore Aircoil Company, Inc.) is hiring a Quality Engineer to develop, implement, maintain, and continuously improve its quality management systems. The role focuses on manufacturing process controls, quality engineering, risk management, supplier quality, and cross-functional process improvement.

Responsibilities

  • Develop and maintain process documentation, including Process Flow Diagrams, PFMEAs, Control Plans, Inspection Plans and Quality Procedures
  • Establish consistent methods for Process Control, verification, documentation and traceability
  • Support the development of Production Part Approval Process (PPAP), Production Quality Plans (PQP) and other customer-specific requirements as applicable
  • Ensure the quality controls are integrated throughout the manufacturing process
  • Support Internal and Third-Party audits including identification of gaps against the standard, Corrective Action response and implementation
  • Work directly with manufacturing and engineering to identify potential process risk and implement preventive controls
  • Evaluate manufacturing processes to identify sources of variation and opportunities for improvement
  • Investigate recurring manufacturing defects and develop sustainable corrective actions
  • Support process validation and new equipment validation as required (dry coil line)
  • Participate in New Product Introduction, engineering changes and manufacturing process changes to ensure quality requirements are incorporated in manufacturing
  • Conduct and coordinate Gage Repeatability & Reproducibility (Gage R&R) studies
  • Evaluate measurement methods, equipment suitability and measurement system variation
  • Establish a proper measurement and inspection method for critical characteristics
  • Support calibration system improvement and ensure measurement equipment is suitable for its intendent application
  • Establish measurement system acceptance criteria and recommend improvements when measurement reliability is inadequate
  • Develop and implement Statistical Process Control (SPC) methodologies when appropriate
  • Conduct process capability studies, including Cp & Cpk analysis when appropriate
  • Establish risk base incoming inspection methodologies
  • Define inspection criteria based on product criticality, supplier performance and customer requirements
  • Investigate supplier-related non-conformances and coordinate with Corporate the Supplier Corrective Action Response
  • Work with Supply chain and purchasing to develop supplier quality metrics and improvement initiatives
  • Support investigation and Resolution of internal and external nonconformances
  • Lead or facilitate root cause for significant or recurrent quality issues
  • Ensure Corrective Actions address root cause and not just symptoms
  • Evaluate effectiveness of implemented Corrective Actions
  • The individual will provide technical guidance to specialists, supervisors, inspectors and personnel in general and promote preventive quality practices and the philosophy that quality is built into the process
  • Participate in Manufacturing floor activities, continuous improvement activities and training activities to ensure effective implementation of quality controls

Preferred

  • Experience with industrial equipment manufacturing mechanical assemblies, electrical controls, sheet metal fabrication, welding, power coating or similar manufacturing processes is preferred
  • Industrial Equipment Manufacturing
  • Mechanical Assembly
  • Electrical Controls
  • Sheet Metal Fabrication
  • Welding
  • Powder Coating
  • Manufacturing Processes

Company

  • Sustainable cooling solutions for HVAC, industrial, and refrigeration markets
  • Jessup, Maryland, USA
  • http://www.baltimoreaircoil.com/
  • Founded in 1938
  • 1001-5000 employees

Qualifications

  • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Manufacturing Engineering, Quality Engineering, or related technical discipline
  • Equivalent combination of technical education and relevant quality manufacturing experience may be considered
  • 2-5 years' experience in quality engineering, manufacturing engineering or related quality function within a manufacturing environment
  • Knowledge in ISO9001 and audit support
  • Practical experience with PFMEA, Control Plans, Root Cause Analysis and Corrective Action methodologies
  • Experience with MSA and Gage R&R
  • Understandings of SPC, process capabilities (Cp / Cpk), PPAP and PQP
  • Experience with 8D and/or A3
  • Technical drawing interpretation (GD&T) with basic mechanical and electrical principles
  • Microsoft office particularly Excell and data analysis tools
  • Experience with industrial equipment manufacturing mechanical assemblies, electrical controls, sheet metal fabrication, welding, power coating or similar manufacturing processes is preferred
  • 2-5 years’ experience in quality engineering, manufacturing engineering or related quality function within a manufacturing environment

Required skills

  • 8D, Control Plans, Corrective Action, GD&T, Gage R&R, ISO 9001, Measurement System Analysis (MSA), Microsoft Excel, PFMEA, PPAP, Process Capability Analysis (Cp/Cpk), Root Cause Analysis, Statistical Process Control (SPC), Team Development

Experience

  • 2-5 years

Job details

Employment type

Full-time

Seniority level

2–5 years

Date posted

Nov 16, 2026

Work mode

On-site

Job source

recruiting2.ultipro.com

Company

Energy

Education and Training

Sustainable cooling solutions for HVAC, industrial, and refrigeration markets

See all 5 jobs from Energy →

Similar jobs

Matched on role, skills and location · live jobs only

See more Corporate Training and Development jobs in Madera

Curtiss-Wright Corporation

2d ago

New

Quality Assurance Engineer

Full-timeOn-siteDanbury, CT$76K – $105K/yr

FCS Curtiss Wright Flow Control Service LLC is hiring a Quality Assurance Engineer to verify compliance with quality requirements independently of the work being performed.

Why similarSame roleISO 9001

The Campbell's Company

2d ago

New

Quality Engineer

Full-timeOn-siteDenver, PA$87K – $120K/yr

Pepperidge Farm, Incorporated is hiring a Quality Engineer to lead industrialization and commercialization activities for designated business units.

Why similarSame roleMicrosoft Excel

Herff Jones

3d ago

Quality Engineer

Full-timeOn-siteIndianapolis, INCompetitive

Herff Jones makes graduation and educational products and services. The Quality Engineer leads quality systems and continuous improvement across operations, supervises quality staff, investigates quality issues, supports audits, and works with…

Why similarSame roleRoot Cause Analysis

Get new Corporate Training and Development jobs in Madera by email

Create job alert

Quality Engineer

Energy · Competitive

Apply on company site