← Back to jobsJob ID col-cmwkupc9n0ne689hq6xi0zpb2

Quality Engineer Job DetailsPosted 3 days ago

Quality Engineer

Full-time
On-site
3–7 years
Competitive
Posted 3 days ago

AMETEK is hiring a Quality Engineer to ensure products, processes, and quality management system activities meet customer, regulatory, and aerospace industry requirements. The role supports manufacturing and supplier quality, audits, corrective actions, validation, customer quality activities, and continuous improvement.

Posted
3 days ago
Source
jobs.ametek.com
Sector
Customer Service

Opens the employer's application page in a new tab

Responsibilities

  • Maintain compliance with AS9100 Quality Management System requirements
  • Support internal, customer, regulatory, and third-party audits
  • Assist in the development, implementation, and continuous improvement of quality procedures, work instructions, and process controls
  • Review manufacturing processes for compliance with engineering, customer, and regulatory requirements
  • Develop and maintain inspection plans, control plans, and quality standards
  • Support First Article Inspections (FAI) in accordance with AS9102 requirements
  • Evaluate nonconforming material and participate in Material Review Board (MRB) activities
  • Monitor process performance and identify opportunities for defect reduction and process improvement
  • Lead investigations of nonconformances, customer complaints, and internal quality issues
  • Develop, implement, and verify corrective and preventive actions (CAPA)
  • Track effectiveness of corrective actions and ensure timely closure
  • Support supplier qualification and performance monitoring activities
  • Review supplier corrective actions and verify effectiveness
  • Participate in supplier audits and source inspections as required
  • Analyze supplier quality data and drive continuous improvement initiatives with suppliers
  • Support Process Validation and Process Capability studies
  • Conduct Measurement System Analysis (MSA) and Gage R&R studies
  • Utilize Statistical Process Control (SPC) techniques to monitor manufacturing performance
  • Ensure validation documentation meets customer and regulatory requirements
  • Act as quality representative during customer visits and audits
  • Review customer quality requirements and ensure deployment throughout the organization
  • Support customer investigations and corrective action responses
  • Lead Lean Manufacturing and Six Sigma quality improvement projects
  • Analyze quality metrics and identify trends
  • Drive initiatives that improve product quality, delivery performance, and operational efficiency

Qualifications

  • Bachelor's degree in Engineering, Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related technical discipline
  • 3-7 years of quality engineering experience in an aerospace, aviation, defense, or highly regulated manufacturing environment
  • Experience working within an AS9100-certified organization
  • Experience with AS9102 First Article Inspection requirements
  • Experience conducting root cause investigations and corrective actions
  • Strong understanding of: + AS9100 + AS13100 + AS9102 + GD&T (Geometric Dimensioning & Tolerancing) + PPAP/APQP principles + Root Cause Corrective Action (RCCA) + Statistical Process Control (SPC) + Risk-based thinking and quality management systems
  • Ability to interpret engineering drawings, specifications, and aerospace standards
  • Demonstrated ability and willingness to use AI tools to improve productivity, decision-making, work quality, and to reduce costs. The successful candidate must be able to identify appropriate AI use cases and critically evaluate AI-generated outputs
  • Strong analytical and problem-solving skills
  • Excellent communication and supplier relationship management capabilities
  • Effective project management and organizational skills
  • Ability to manage multiple priorities in a fast-paced aerospace environment
  • Proficiency with Microsoft Office applications and quality management systems
  • applicants must have the legal right to work in the US and additionally must be legally authorized to access export-controlled information and source code

Preferred

  • Certified Quality Engineer (CQE) - ASQ
  • Certified Supplier Quality Professional (CSQP) - ASQ
  • Certified Lead Auditor training
  • Lean Six Sigma Green Belt or Black Belt
  • NADCAP auditing experience
  • Experience with QT9 QMS Software suite
  • Experience with ERP and Quality Management Systems (Oracle.)
  • Experience supporting FAA, DoD, or commercial aerospace customers
  • Demonstrated ability and willingness to use AI tools to improve productivity, decision-marking, work quality, and to reduce costs. The successful candidate must be able to identify appropriate AI use cases and critically evaluate AI-generated outputs
  • ASQ Certified Quality Engineer
  • ASQ Certified Supplier Quality Professional
  • Lean Six Sigma Green Belt
  • Lean Six Sigma Black Belt

Required skills

APQPAS9102 First Article InspectionAerospace Quality EngineeringCertified Quality Engineer (CQE)GD&TOracle ERPPPAPQT9 QMSStatistical Process Control (SPC)Supplier Relationship Management

Nice to have

Certified Lead Auditor training

Full job description

AMETEK is hiring a Quality Engineer to ensure products, processes, and quality management system activities meet customer, regulatory, and aerospace industry requirements. The role supports manufacturing and supplier quality, audits, corrective actions, validation, customer quality activities, and continuous improvement.

Responsibilities

  • Maintain compliance with AS9100 Quality Management System requirements
  • Support internal, customer, regulatory, and third-party audits
  • Assist in the development, implementation, and continuous improvement of quality procedures, work instructions, and process controls
  • Review manufacturing processes for compliance with engineering, customer, and regulatory requirements
  • Develop and maintain inspection plans, control plans, and quality standards
  • Support First Article Inspections (FAI) in accordance with AS9102 requirements
  • Evaluate nonconforming material and participate in Material Review Board (MRB) activities
  • Monitor process performance and identify opportunities for defect reduction and process improvement
  • Lead investigations of nonconformances, customer complaints, and internal quality issues
  • Develop, implement, and verify corrective and preventive actions (CAPA)
  • Track effectiveness of corrective actions and ensure timely closure
  • Support supplier qualification and performance monitoring activities
  • Review supplier corrective actions and verify effectiveness
  • Participate in supplier audits and source inspections as required
  • Analyze supplier quality data and drive continuous improvement initiatives with suppliers
  • Support Process Validation and Process Capability studies
  • Conduct Measurement System Analysis (MSA) and Gage R&R studies
  • Utilize Statistical Process Control (SPC) techniques to monitor manufacturing performance
  • Ensure validation documentation meets customer and regulatory requirements
  • Act as quality representative during customer visits and audits
  • Review customer quality requirements and ensure deployment throughout the organization
  • Support customer investigations and corrective action responses
  • Lead Lean Manufacturing and Six Sigma quality improvement projects
  • Analyze quality metrics and identify trends
  • Drive initiatives that improve product quality, delivery performance, and operational efficiency

Preferred

  • Certified Quality Engineer (CQE) - ASQ
  • Certified Supplier Quality Professional (CSQP) - ASQ
  • Certified Lead Auditor training
  • Lean Six Sigma Green Belt or Black Belt
  • NADCAP auditing experience
  • Experience with QT9 QMS Software suite
  • Experience with ERP and Quality Management Systems (Oracle.)
  • Experience supporting FAA, DoD, or commercial aerospace customers
  • Demonstrated ability and willingness to use AI tools to improve productivity, decision-marking, work quality, and to reduce costs. The successful candidate must be able to identify appropriate AI use cases and critically evaluate AI-generated outputs
  • ASQ Certified Quality Engineer
  • ASQ Certified Supplier Quality Professional
  • Lead Auditor Training
  • Lean Six Sigma Green Belt
  • Lean Six Sigma Black Belt
  • NADCAP Auditing
  • QT9 QMS Software
  • ERP Systems
  • Oracle
  • Aerospace Customer Support
  • Productivity Improvement
  • Work Quality Improvement
  • Cost Reduction
  • Critical Evaluation
  • Decision-Making

Company

  • Industrial technology solutions, electronic instruments, and electromechanical devices
  • Berwyn, Pennsylvania, USA
  • http://www.ametek.com/
  • Founded in 1930
  • 10001+ employees

Qualifications

  • Bachelor's degree in Engineering, Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related technical discipline
  • 3-7 years of quality engineering experience in an aerospace, aviation, defense, or highly regulated manufacturing environment
  • Experience working within an AS9100-certified organization
  • Experience with AS9102 First Article Inspection requirements
  • Experience conducting root cause investigations and corrective actions
  • Strong understanding of: + AS9100 + AS13100 + AS9102 + GD&T (Geometric Dimensioning & Tolerancing) + PPAP/APQP principles + Root Cause Corrective Action (RCCA) + Statistical Process Control (SPC) + Risk-based thinking and quality management systems
  • Ability to interpret engineering drawings, specifications, and aerospace standards
  • Demonstrated ability and willingness to use AI tools to improve productivity, decision-making, work quality, and to reduce costs. The successful candidate must be able to identify appropriate AI use cases and critically evaluate AI-generated outputs
  • Strong analytical and problem-solving skills
  • Excellent communication and supplier relationship management capabilities
  • Effective project management and organizational skills
  • Ability to manage multiple priorities in a fast-paced aerospace environment
  • Proficiency with Microsoft Office applications and quality management systems
  • applicants must have the legal right to work in the US and additionally must be legally authorized to access export-controlled information and source code
  • Applicants must have the legal right to work in the US and additionally must be legally authorized to access export-controlled information and source code
  • Certified Quality Engineer (CQE) - ASQ
  • Certified Supplier Quality Professional (CSQP) - ASQ
  • Certified Lead Auditor training
  • Lean Six Sigma Green Belt or Black Belt
  • NADCAP auditing experience
  • Experience with QT9 QMS Software suite
  • Experience with ERP and Quality Management Systems (Oracle.)
  • Experience supporting FAA, DoD, or commercial aerospace customers
  • Demonstrated ability and willingness to use AI tools to improve productivity, decision-marking, work quality, and to reduce costs. The successful candidate must be able to identify appropriate AI use cases and critically evaluate AI-generated outputs
  • 3-7 years of quality engineering experience in an aerospace, aviation, defense, or highly regulated manufacturing environment.

Required skills

  • APQP, AS9102 First Article Inspection, Aerospace Quality Engineering, Certified Quality Engineer (CQE), GD&T, Oracle ERP, PPAP, QT9 QMS, Root Cause Corrective Action (RCCA), Statistical Process Control (SPC), Supplier Relationship Management

Preferred skills

  • Certified Lead Auditor training, Certified Quality Engineer (CQE) - ASQ, Certified Supplier Quality Professional (CSQP) - ASQ, Experience with ERP and Quality Management Systems (Oracle.), Experience with QT9 QMS Software suite, Lean Six Sigma Green Belt or Black Belt, NADCAP auditing experience

Experience

  • 3-7 years

Job details

Employment type

Full-time

Seniority level

3–7 years

Date posted

Nov 17, 2026

Work mode

On-site

Job source

jobs.ametek.com

Company

Quality Engineer Job Details

Customer Service

Industrial technology solutions, electronic instruments, and electromechanical devices

  • Berwyn, Pennsylvania, USA
  • Customer Service
  • 10001+ employees
  • Founded 1930
  • ametek.com

Similar jobs

Matched on role, skills and location · live jobs only

See more Customer Support jobs in Garden City

Mattson Technology

1d ago

New

Sr. Supplier Quality Engineer

Full-timeOn-siteFremont, CA$106K – $146K/yr

Mattson Technology is hiring a Supplier Quality Engineer to ensure suppliers meet quality standards and deliver materials and components that conform to specifications.

Why similarSame roleAPQPPPAP

Kaleidoscope Innovation

1d ago

New

Senior Quality Engineer

Full-timeOn-siteLafayette, INCompetitive

Kaleidoscope Innovation is seeking a Senior Quality Engineer to support proactive quality assurance and real-time problem-solving in a high-volume manufacturing environment.

Why similarSame roleAPQPPPAP

Brose Group

1d ago

New

Supplier Quality Engineer (m/f/d) Brose Sitech

Full-timeOn-siteBlythewood, SCCompetitive

Brose Group is hiring a Supplier Quality Engineer to manage supplier quality performance and development for suppliers supporting its Blythewood manufacturing facility.

Why similarSame roleAPQPGD&T

Get new Customer Support jobs in Garden City by email

Create job alert

Quality Engineer

Quality Engineer Job Details · Competitive

Apply on company site