← Back to jobsJob ID col-cmwkv1ezm0nod89hq4m6nsvpp

SkydioPosted 4 days ago

Senior Supplier Quality Engineer - Camera

Full-time
Hybrid
5+ years
$145K – $219K/yr
Posted 4 days ago

Skydio is hiring a Senior Supplier Quality Engineer for Camera & Optics to own quality across its camera and optics supply base. The role partners with engineering, manufacturing, and supply chain teams to qualify suppliers, strengthen manufacturing readiness, and drive quality and reliability improvements from product development through mass production.

Posted
4 days ago
Source
jobs.ashbyhq.com
Sector
Electrical Engineering

Opens the employer's application page in a new tab

Responsibilities

  • Conduct supplier assessments and on-site audits to evaluate camera module, lens, and coating suppliers' quality systems, cleanliness and particle controls, process capability, metrology capability, and overall production readiness
  • Partner with Optical, Electrical, Mechanical, Image Quality, and Manufacturing Engineers throughout the Hardware Product Development Process to ensure robust quality planning, manufacturability, testability, and supplier readiness for new product introductions and volume production
  • Influence camera and lens designs early through DFM/DFA reviews, opto-mechanical and statistical tolerance analysis, and design risk assessment — trading off image performance, yield, scalability, and cost before tooling is committed
  • Drive supplier qualification activities including process audits, First Article Inspections (FAI), Production Validation Builds (PVT), and manufacturing readiness reviews to ensure compliance with Skydio's optical, mechanical, reliability, and quality requirements
  • Lead supplier quality planning through prototype, pre-production, and mass production, including control plans, PFMEAs, process validations, calibration strategy, and outgoing quality strategies that minimize incoming inspection and maximize field reliability
  • Own optical end-of-line test strategy at the supplier — MTF/SFR, distortion, field curvature and tilt, relative illumination, stray light, flare and ghosting, color and luminance shading, defective pixels, particle and cosmetic criteria — including limit-sample governance, chart and light-source control, and correlation between supplier, Skydio, and field measurements
  • Drive supplier quality and manufacturing readiness for thermal imaging modules, including thermal sensor, infrared optics, opto-mechanical assembly, calibration, and module-level integration. Assess and control critical thermal-camera processes such as NUC calibration, gain/dynamic-range calibration, bad-pixel correction, thermal stabilization, and blackbody-based performance verification across operating temperature ranges
  • Manage supplier corrective action requests (SCARs), 8D investigations, containment actions, and root cause analysis to rapidly resolve quality issues and drive systemic improvements across lines and across suppliers
  • Develop and maintain supplier scorecards and KPIs focused on quality, yield, reliability, and responsiveness, driving continuous improvement toward zero defects
  • Analyze factory and field quality data to identify trends, assess supplier performance, and proactively mitigate risks across lens fabrication, coating, active alignment, adhesive dispense and cure, sensor attach, and module-level calibration
  • Validate that supplier corrective actions for design or process changes are sustainable and correctly propagated to every affected line, tool, and site
  • Recommend alternative materials, adhesives, coatings, or process approaches that improve manufacturability, image performance, environmental robustness, or cost
  • Collaborate with suppliers to implement inspection, test, and process control methodologies that hold long-term process capability on optically critical dimensions

Qualifications

  • Bachelor's degree in Optical, Mechanical, Electrical, or Manufacturing Engineering, Physics, or equivalent practical experience
  • 5+ years in supplier quality, manufacturing, or product engineering for camera modules, lenses, or optical assemblies, including hands-on experience at supplier factories
  • You are a self-starter with a passion for delivering exceptional image quality and reliability in advanced electro-optical products
  • You possess strong interpersonal, communication, and leadership skills, with the ability to influence cross-functional teams and supplier partners to achieve quality objectives
  • You have experience developing, qualifying, and managing camera and optics suppliers across multiple geographies, and you're comfortable working across time zones and cultures
  • You have quality engineering experience in high-volume, high-complexity consumer electronics, automotive, aerospace, robotics, or similar industries, with deep knowledge of camera module and lens manufacturing
  • You are familiar with lens and camera module manufacturing processes: injection molding and glass lens fabrication, AR/IR coating deposition, barrel assembly, active alignment (AA), UV and thermal adhesive cure, dispensing, sensor attach and wire bond or flip chip, VCM and actuator assembly, and optical end-of-line test
  • You have in-depth knowledge of image sensors, ISP behavior, and image quality metrics, and can distinguish between optics, sensor, calibration, and tuning problems
  • You are comfortable with optical simulation and analysis tools such as Zemax (preferred) or Code V, and can independently characterize a lens or module
  • You have working knowledge of thermal imaging systems, including uncooled infrared sensors, infrared optics and materials, NETD, responsivity, non-uniformity correction (NUC), bad-pixel correction, gain and dynamic-range calibration, thermal drift, and the impact of sensor, lens, housing, and environmental temperature on image quality and calibration stability
  • You are experienced interpreting optical prescriptions, opto-mechanical drawings, GD&T, ISO 10110 notation, assembly drawings, and engineering documentation, and can effectively communicate technical requirements to suppliers
  • You are proficient with quality tools such as PFMEA, DFMEA, Control Plans, PPAP, 8D, Root Cause Analysis (5-Why, Fishbone), Statistical Process Control (SPC), process capability, Gage R&R, and Design of Experiments (DOE), with demonstrated measurable results
  • You are comfortable with statistical analysis and tolerance analysis tools such as JMP or Minitab, including Monte Carlo and statistical tolerance stack-ups on opto-mechanical assemblies
  • You have experience with component qualification, supplier process validation, reliability testing, and failure analysis for optical and electronic assemblies, including thermal cycling, humidity, vibration, shock and drop, UV and environmental exposure, and ingress protection
  • DFSS experience is highly desirable

Preferred

  • Six Sigma background is valued

Required skills

Code VGD&T and ISO 10110JMPMinitabPPAP and 8DThermal Imaging SystemsZemax

Full job description

Skydio is hiring a Senior Supplier Quality Engineer for Camera & Optics to own quality across its camera and optics supply base. The role partners with engineering, manufacturing, and supply chain teams to qualify suppliers, strengthen manufacturing readiness, and drive quality and reliability improvements from product development through mass production.

Responsibilities

  • Conduct supplier assessments and on-site audits to evaluate camera module, lens, and coating suppliers' quality systems, cleanliness and particle controls, process capability, metrology capability, and overall production readiness
  • Partner with Optical, Electrical, Mechanical, Image Quality, and Manufacturing Engineers throughout the Hardware Product Development Process to ensure robust quality planning, manufacturability, testability, and supplier readiness for new product introductions and volume production
  • Influence camera and lens designs early through DFM/DFA reviews, opto-mechanical and statistical tolerance analysis, and design risk assessment — trading off image performance, yield, scalability, and cost before tooling is committed
  • Drive supplier qualification activities including process audits, First Article Inspections (FAI), Production Validation Builds (PVT), and manufacturing readiness reviews to ensure compliance with Skydio's optical, mechanical, reliability, and quality requirements
  • Lead supplier quality planning through prototype, pre-production, and mass production, including control plans, PFMEAs, process validations, calibration strategy, and outgoing quality strategies that minimize incoming inspection and maximize field reliability
  • Own optical end-of-line test strategy at the supplier — MTF/SFR, distortion, field curvature and tilt, relative illumination, stray light, flare and ghosting, color and luminance shading, defective pixels, particle and cosmetic criteria — including limit-sample governance, chart and light-source control, and correlation between supplier, Skydio, and field measurements
  • Drive supplier quality and manufacturing readiness for thermal imaging modules, including thermal sensor, infrared optics, opto-mechanical assembly, calibration, and module-level integration. Assess and control critical thermal-camera processes such as NUC calibration, gain/dynamic-range calibration, bad-pixel correction, thermal stabilization, and blackbody-based performance verification across operating temperature ranges
  • Manage supplier corrective action requests (SCARs), 8D investigations, containment actions, and root cause analysis to rapidly resolve quality issues and drive systemic improvements across lines and across suppliers
  • Develop and maintain supplier scorecards and KPIs focused on quality, yield, reliability, and responsiveness, driving continuous improvement toward zero defects
  • Analyze factory and field quality data to identify trends, assess supplier performance, and proactively mitigate risks across lens fabrication, coating, active alignment, adhesive dispense and cure, sensor attach, and module-level calibration
  • Validate that supplier corrective actions for design or process changes are sustainable and correctly propagated to every affected line, tool, and site
  • Recommend alternative materials, adhesives, coatings, or process approaches that improve manufacturability, image performance, environmental robustness, or cost
  • Collaborate with suppliers to implement inspection, test, and process control methodologies that hold long-term process capability on optically critical dimensions

Preferred

  • Six Sigma background is valued
  • Six Sigma

Benefits

  • Equity in the form of stock options
  • Relocation assistance may be provided for eligible roles
  • Regular, full-time employees are eligible to enroll in the Company’s group health insurance plans
  • Regular, full-time employees are eligible to receive paid vacation time, sick leave, holiday pay and a 401K savings plan
  • Hybrid work arrangement

Company

  • AI-powered autonomous drones for public safety, inspection, and defense
  • San Mateo, California, USA
  • https://www.skydio.com/
  • Founded in 2014
  • 501-1000 employees

Qualifications

  • Bachelor's degree in Optical, Mechanical, Electrical, or Manufacturing Engineering, Physics, or equivalent practical experience
  • 5+ years in supplier quality, manufacturing, or product engineering for camera modules, lenses, or optical assemblies, including hands-on experience at supplier factories
  • You are a self-starter with a passion for delivering exceptional image quality and reliability in advanced electro-optical products
  • You possess strong interpersonal, communication, and leadership skills, with the ability to influence cross-functional teams and supplier partners to achieve quality objectives
  • You have experience developing, qualifying, and managing camera and optics suppliers across multiple geographies, and you're comfortable working across time zones and cultures
  • You have quality engineering experience in high-volume, high-complexity consumer electronics, automotive, aerospace, robotics, or similar industries, with deep knowledge of camera module and lens manufacturing
  • You are familiar with lens and camera module manufacturing processes: injection molding and glass lens fabrication, AR/IR coating deposition, barrel assembly, active alignment (AA), UV and thermal adhesive cure, dispensing, sensor attach and wire bond or flip chip, VCM and actuator assembly, and optical end-of-line test
  • You have in-depth knowledge of image sensors, ISP behavior, and image quality metrics, and can distinguish between optics, sensor, calibration, and tuning problems
  • You are comfortable with optical simulation and analysis tools such as Zemax (preferred) or Code V, and can independently characterize a lens or module
  • You have working knowledge of thermal imaging systems, including uncooled infrared sensors, infrared optics and materials, NETD, responsivity, non-uniformity correction (NUC), bad-pixel correction, gain and dynamic-range calibration, thermal drift, and the impact of sensor, lens, housing, and environmental temperature on image quality and calibration stability
  • You are experienced interpreting optical prescriptions, opto-mechanical drawings, GD&T, ISO 10110 notation, assembly drawings, and engineering documentation, and can effectively communicate technical requirements to suppliers
  • You are proficient with quality tools such as PFMEA, DFMEA, Control Plans, PPAP, 8D, Root Cause Analysis (5-Why, Fishbone), Statistical Process Control (SPC), process capability, Gage R&R, and Design of Experiments (DOE), with demonstrated measurable results
  • You are comfortable with statistical analysis and tolerance analysis tools such as JMP or Minitab, including Monte Carlo and statistical tolerance stack-ups on opto-mechanical assemblies
  • You have experience with component qualification, supplier process validation, reliability testing, and failure analysis for optical and electronic assemblies, including thermal cycling, humidity, vibration, shock and drop, UV and environmental exposure, and ingress protection
  • DFSS experience is highly desirable
  • Six Sigma background is valued
  • 5+ years in supplier quality, manufacturing, or product engineering for camera modules, lenses, or optical assemblies, including hands-on experience at supplier factories.

Required skills

  • Camera Module and Lens Manufacturing, Code V, GD&T and ISO 10110, Image Sensors and Image Quality Metrics, JMP, Minitab, Optics and Opto-Mechanical Engineering, PFMEA, DFMEA, and Control Plans, PPAP and 8D, Reliability Testing and Failure Analysis, Statistical Process Control and Process Capability, Thermal Imaging Systems, Zemax

Preferred skills

  • Six Sigma background is valued

Experience

  • 5+ years

Job details

Employment type

Full-time

Seniority level

5+ years

Date posted

Nov 17, 2026

Work mode

Hybrid

Job source

jobs.ashbyhq.com

Company

Skydio

Electrical Engineering

AI-powered autonomous drones for public safety, inspection, and defense

See all 2 jobs from Skydio →
  • San Mateo, California, USA
  • Electrical Engineering
  • 501-1000 employees
  • Founded 2014
  • skydio.com

Similar jobs

Matched on role, skills and location · live jobs only

See more Electrical Test Engineer jobs in San Mateo

3M

2d ago

New

Senior Quality Engineer*

Full-timeOn-siteMaplewood, MNCompetitive

3M is a global company focused on innovative products, technologies, and solutions. The Senior Quality Engineer will lead quality initiatives, support new product commercialization and change management, drive product and process improvements, and provide…

Why similarSame roleJMPMinitab

ePropelled

2d ago

New

Supplier Quality Engineer

Full-timeOn-siteLaconia, NHCompetitive

ePropelled is hiring a Supplier Quality Engineer to support the development, management, and continuous improvement of its global supply chain.

Why similarSame role

Socomec Group

4d ago

Supplier Quality Engineer

Full-timeOn-siteSuwanee, GA$95K – $105K/yr

Socomec Group is hiring a Supplier Quality Engineer to oversee supplier and product quality, ensuring supplier parts and products meet design, manufacturing, and industry requirements.

Why similarSame role

Get new Electrical Test Engineer jobs in San Mateo by email

Create job alert

Senior Supplier Quality Engineer - Camera

Skydio · $145K – $219K/yr

Apply on company site