← Back to jobsJob ID col-cmwnylpx202a0d8ha4p37b5t8

Fenner Dunlop AmericasPosted 1 day ago

Quality EngineerNew

Full-time
On-site
Mid level
Competitive
Posted 1 day ago

Fenner Dunlop is hiring a Quality Engineer for its Lavonia manufacturing team. The role supports manufacturing process and product quality through process improvement, data analysis, problem solving, validation, quality-system compliance, and collaboration with production, technical, supplier, and customer-facing teams.

Posted
1 day ago
Source
recruiting.ultipro.com
Sector
Customer Service

Opens the employer's application page in a new tab

Responsibilities

  • Monitor manufacturing processes and product performance across yarn preparation, twisting, beaming, weaving, fabric treatment, and finishing operations, as applicable
  • Identify sources of process variation, defects, waste, rework, downtime, and inefficiency, and develop improvements that increase process capability, consistency, product quality, and manufacturing performance
  • Develop and improve process controls, inspection methods, quality checkpoints, and standardized practices to prevent defects and maintain product consistency
  • Use engineering principles and manufacturing data to identify and prioritize continuous improvement and cost-reduction opportunities while maintaining product quality and performance
  • Lead and support investigations of manufacturing issues, product nonconformances, and customer concerns using structured problem-solving techniques such as root cause analysis, 5 Why, fishbone analysis, and 8D
  • Develop and implement corrective and preventive actions that address identified root causes
  • Verify the effectiveness and sustainability of corrective actions, working with responsible departments to prevent recurrence
  • Provide hands-on engineering support across manufacturing processes, working closely with Production, Maintenance, Technical, and Quality personnel to troubleshoot product and process issues, optimize operating conditions, and improve process reliability
  • Support manufacturing teams in translating quality and technical findings into practical process improvements
  • Provide technical support outside normal working hours as required to address significant manufacturing or quality issues
  • Conduct or support manufacturing process audits and floor assessments to verify adherence to established process controls, operating procedures, and product requirements while identifying opportunities for improvement
  • Analyze manufacturing and quality data using appropriate statistical techniques, including SPC, trend analysis, Pareto analysis, and process capability analysis
  • Monitor key quality performance indicators, including scrap, rework, nonconformances, customer complaints, and process capability, identifying trends, emerging risks, and improvement opportunities and communicating recommended actions to plant leadership
  • Establish and improve process controls based on manufacturing performance, product requirements, and statistical analysis
  • Coordinate with laboratory personnel to ensure required testing and inspection activities are completed, accurately documented, and evaluated against applicable specifications and customer requirements
  • Investigate abnormal or out-of-specification results and translate findings into appropriate manufacturing actions
  • Support validation of process changes, material changes, equipment modifications, and product improvements
  • Develop and improve product specifications, acceptance criteria, inspection methods, and laboratory testing practices to support reliable evaluation of product and process performance
  • Partner with Technical, Engineering, and manufacturing personnel to plan and execute trials involving new products, materials, equipment, manufacturing processes, and process conditions
  • Define trial objectives and acceptance criteria, coordinate data collection and testing, and evaluate results
  • Ensure proposed changes achieve required product quality and process performance before implementation
  • Support Engineering Change Management and Management of Change activities associated with new materials, equipment, products, and manufacturing process changes, ensuring quality risks, validation requirements, and documentation are appropriately addressed
  • Support the control and disposition of nonconforming raw materials, work-in-process, and finished products, ensuring affected material is properly identified, documented, segregated, evaluated, and controlled
  • Work with Production, Technical, Quality, and other applicable functions to determine disposition, containment, and corrective-action requirements
  • Support customer concession and deviation requests for nonconforming product, ensuring appropriate technical evaluation, documentation, and approval prior to release
  • Support the facility Quality Management System, including process documentation, internal audits, corrective actions, calibration, change control, and compliance with applicable customer and quality requirements
  • Support external audits, customer audits, and quality system assessments as required
  • Identify opportunities to improve QMS effectiveness while maintaining alignment between documented requirements and manufacturing practices
  • Support investigations of customer complaints, supplier quality issues, and product performance concerns, providing technical analysis, test results, root cause findings, and corrective-action support
  • Work with Procurement, suppliers, manufacturing, Technical, and Quality personnel to investigate material nonconformances, evaluate supplier technical requirements, and implement actions to improve incoming material quality
  • Collaborate with other Fenner Dunlop facilities to investigate product quality and performance concerns, coordinate corrective actions, and support resolution of customer concessions and product deviations
  • Work directly with manufacturing teams and plant leadership to implement process improvements, standardize best practices, and strengthen technical understanding
  • Provide technical guidance and training to manufacturing and laboratory personnel regarding quality standards, inspection requirements, process controls, and problem-solving methods
  • Promote a culture of safety, quality, accountability, problem solving, and continuous improvement
  • Comply with applicable safety requirements, policies, and procedures and promote a safe and professional work environment
  • Participate in facility safety initiatives, inspections, and audits, proactively identifying and reporting hazards and unsafe conditions
  • Handle laboratory chemicals and testing materials in accordance with established safety procedures and applicable requirements
  • Demonstrate and promote Fenner Dunlop's Values and Behaviors in all work activities and interactions

Qualifications

  • Bachelor's degree in Engineering, Materials Science, Chemistry, or a related technical discipline, or an equivalent combination of education and relevant manufacturing experience
  • Experience in manufacturing, process engineering, quality engineering, continuous improvement, or a related technical function
  • Ability to work hands-on with manufacturing teams to troubleshoot process and product-quality issues and implement improvements
  • Demonstrated experience investigating manufacturing or quality issues, performing root cause analysis, and implementing sustainable corrective actions
  • Demonstrated ability to analyze manufacturing and quality data, identify trends and root causes, and translate findings into practical improvement actions
  • Ability to interpret product specifications, test data, manufacturing requirements, technical documentation, and quality standards and apply findings to manufacturing and quality decisions
  • Ability to work effectively across functions and influence improvements without direct supervisory authority
  • Strong analytical, problem-solving, organizational, and communication skills, including the ability to communicate technical findings and recommendations effectively to manufacturing personnel, technical teams, customers, and plant leadership

Preferred

  • Experience applying statistical, problem-solving, and continuous improvement tools such as SPC, process capability, DOE, FMEA, 8D, 5 Why, Pareto analysis, Lean, Six Sigma, or similar methodologies
  • Experience in textiles, rubber, coatings, chemical processing, converting, or other continuous or process manufacturing environments
  • Experience supporting product or process validation, manufacturing trials, Engineering Change Requests (ECRs), Engineering Change Management, or Management of Change (MOC) processes
  • Working knowledge of textile fibers, yarns, fabric construction, coatings or treatments, and the relationship between material properties, manufacturing processes, and finished-product performance
  • Experience with physical or chemical testing of materials and manufactured products
  • Experience supporting customer or supplier quality investigations
  • Working knowledge of ISO 9001 or a comparable Quality Management System, including internal auditing and corrective-action processes
  • Understanding of Cost of Quality principles, including scrap, rework, waste, and internal and external failure costs
  • Proficiency with Microsoft Excel or similar tools for manufacturing and quality data analysis and reporting
  • Professional certification such as ASQ Certified Quality Engineer (CQE), Six Sigma Green Belt, or equivalent
  • Statistical Process Control (SPC)
  • Design of Experiments (DOE)
  • Effects Analysis (FMEA)
  • Engineering Change Requests (ECRs)
  • Management of Change (MOC)
  • Cost of Quality
  • ASQ Certified Quality Engineer (CQE)
  • Six Sigma Green Belt

Required skills

8D Problem SolvingCorrective and Preventive ActionISO 9001ManufacturingMicrosoft ExcelProcess Capability AnalysisProcess EngineeringQuality EngineeringRoot Cause Analysis

Full job description

Fenner Dunlop is hiring a Quality Engineer for its Lavonia manufacturing team. The role supports manufacturing process and product quality through process improvement, data analysis, problem solving, validation, quality-system compliance, and collaboration with production, technical, supplier, and customer-facing teams.

Responsibilities

  • Monitor manufacturing processes and product performance across yarn preparation, twisting, beaming, weaving, fabric treatment, and finishing operations, as applicable
  • Identify sources of process variation, defects, waste, rework, downtime, and inefficiency, and develop improvements that increase process capability, consistency, product quality, and manufacturing performance
  • Develop and improve process controls, inspection methods, quality checkpoints, and standardized practices to prevent defects and maintain product consistency
  • Use engineering principles and manufacturing data to identify and prioritize continuous improvement and cost-reduction opportunities while maintaining product quality and performance
  • Lead and support investigations of manufacturing issues, product nonconformances, and customer concerns using structured problem-solving techniques such as root cause analysis, 5 Why, fishbone analysis, and 8D
  • Develop and implement corrective and preventive actions that address identified root causes
  • Verify the effectiveness and sustainability of corrective actions, working with responsible departments to prevent recurrence
  • Provide hands-on engineering support across manufacturing processes, working closely with Production, Maintenance, Technical, and Quality personnel to troubleshoot product and process issues, optimize operating conditions, and improve process reliability
  • Support manufacturing teams in translating quality and technical findings into practical process improvements
  • Provide technical support outside normal working hours as required to address significant manufacturing or quality issues
  • Conduct or support manufacturing process audits and floor assessments to verify adherence to established process controls, operating procedures, and product requirements while identifying opportunities for improvement
  • Analyze manufacturing and quality data using appropriate statistical techniques, including SPC, trend analysis, Pareto analysis, and process capability analysis
  • Monitor key quality performance indicators, including scrap, rework, nonconformances, customer complaints, and process capability, identifying trends, emerging risks, and improvement opportunities and communicating recommended actions to plant leadership
  • Establish and improve process controls based on manufacturing performance, product requirements, and statistical analysis
  • Coordinate with laboratory personnel to ensure required testing and inspection activities are completed, accurately documented, and evaluated against applicable specifications and customer requirements
  • Investigate abnormal or out-of-specification results and translate findings into appropriate manufacturing actions
  • Support validation of process changes, material changes, equipment modifications, and product improvements
  • Develop and improve product specifications, acceptance criteria, inspection methods, and laboratory testing practices to support reliable evaluation of product and process performance
  • Partner with Technical, Engineering, and manufacturing personnel to plan and execute trials involving new products, materials, equipment, manufacturing processes, and process conditions
  • Define trial objectives and acceptance criteria, coordinate data collection and testing, and evaluate results
  • Ensure proposed changes achieve required product quality and process performance before implementation
  • Support Engineering Change Management and Management of Change activities associated with new materials, equipment, products, and manufacturing process changes, ensuring quality risks, validation requirements, and documentation are appropriately addressed
  • Support the control and disposition of nonconforming raw materials, work-in-process, and finished products, ensuring affected material is properly identified, documented, segregated, evaluated, and controlled
  • Work with Production, Technical, Quality, and other applicable functions to determine disposition, containment, and corrective-action requirements
  • Support customer concession and deviation requests for nonconforming product, ensuring appropriate technical evaluation, documentation, and approval prior to release
  • Support the facility Quality Management System, including process documentation, internal audits, corrective actions, calibration, change control, and compliance with applicable customer and quality requirements
  • Support external audits, customer audits, and quality system assessments as required
  • Identify opportunities to improve QMS effectiveness while maintaining alignment between documented requirements and manufacturing practices
  • Support investigations of customer complaints, supplier quality issues, and product performance concerns, providing technical analysis, test results, root cause findings, and corrective-action support
  • Work with Procurement, suppliers, manufacturing, Technical, and Quality personnel to investigate material nonconformances, evaluate supplier technical requirements, and implement actions to improve incoming material quality
  • Collaborate with other Fenner Dunlop facilities to investigate product quality and performance concerns, coordinate corrective actions, and support resolution of customer concessions and product deviations
  • Work directly with manufacturing teams and plant leadership to implement process improvements, standardize best practices, and strengthen technical understanding
  • Provide technical guidance and training to manufacturing and laboratory personnel regarding quality standards, inspection requirements, process controls, and problem-solving methods
  • Promote a culture of safety, quality, accountability, problem solving, and continuous improvement
  • Comply with applicable safety requirements, policies, and procedures and promote a safe and professional work environment
  • Participate in facility safety initiatives, inspections, and audits, proactively identifying and reporting hazards and unsafe conditions
  • Handle laboratory chemicals and testing materials in accordance with established safety procedures and applicable requirements
  • Demonstrate and promote Fenner Dunlop's Values and Behaviors in all work activities and interactions

Preferred

  • Experience applying statistical, problem-solving, and continuous improvement tools such as SPC, process capability, DOE, FMEA, 8D, 5 Why, Pareto analysis, Lean, Six Sigma, or similar methodologies
  • Experience in textiles, rubber, coatings, chemical processing, converting, or other continuous or process manufacturing environments
  • Experience supporting product or process validation, manufacturing trials, Engineering Change Requests (ECRs), Engineering Change Management, or Management of Change (MOC) processes
  • Working knowledge of textile fibers, yarns, fabric construction, coatings or treatments, and the relationship between material properties, manufacturing processes, and finished-product performance
  • Experience with physical or chemical testing of materials and manufactured products
  • Experience supporting customer or supplier quality investigations
  • Working knowledge of ISO 9001 or a comparable Quality Management System, including internal auditing and corrective-action processes
  • Understanding of Cost of Quality principles, including scrap, rework, waste, and internal and external failure costs
  • Proficiency with Microsoft Excel or similar tools for manufacturing and quality data analysis and reporting
  • Professional certification such as ASQ Certified Quality Engineer (CQE), Six Sigma Green Belt, or equivalent
  • Statistical Process Control (SPC)
  • Process Capability Analysis
  • Design of Experiments (DOE)
  • Failure Mode
  • Effects Analysis (FMEA)
  • 8D Problem Solving
  • 5 Why Analysis
  • Pareto Analysis
  • Lean Manufacturing
  • Six Sigma
  • Process Manufacturing
  • Textile Manufacturing
  • Rubber Manufacturing
  • Coatings Manufacturing
  • Chemical Processing
  • Converting
  • Product Validation
  • Process Validation
  • Manufacturing Trials
  • Engineering Change Requests (ECRs)
  • Engineering Change Management
  • Management of Change (MOC)
  • Textile Fibers
  • Yarns
  • Fabric Construction
  • Coatings
  • Material Properties
  • Manufacturing Processes
  • Product Performance
  • Physical Materials Testing
  • Chemical Materials Testing
  • Customer Quality Investigations
  • Supplier Quality Investigations
  • ISO 9001
  • Quality Management Systems
  • Internal Auditing
  • Corrective Actions
  • Cost of Quality
  • Scrap
  • Rework Analysis
  • Waste Reduction
  • Failure Cost Analysis
  • Microsoft Excel
  • Data Reporting
  • ASQ Certified Quality Engineer (CQE)
  • Six Sigma Green Belt

Benefits

  • Medical, Dental, and Vision Insurance on your first day
  • Medical Travel Reimbursement for critical healthcare travel over 100 miles from home
  • Company Paid Life Insurance
  • Competitive Paid Time Off & Company Holidays
  • 401K Retirement Savings Plan with a dollar-for-dollar match up to 6% of your salary
  • Extensive Paid Parental Leave in the event of a birth or adoption
  • Opportunities to purchase Michelin Stock at a discounted rate
  • Michelin Tire Rebates
  • Employee Assistance Program that provides health, financial, and legal counseling among other resources

Company

  • Conveyor belts for bulk material handling and mining operations
  • Coraopolis, Pennsylvania, USA
  • http://fennerdunlopamericas.com/
  • Founded in 1861
  • 501-1000 employees

Qualifications

  • Bachelor's degree in Engineering, Materials Science, Chemistry, or a related technical discipline, or an equivalent combination of education and relevant manufacturing experience
  • Experience in manufacturing, process engineering, quality engineering, continuous improvement, or a related technical function
  • Ability to work hands-on with manufacturing teams to troubleshoot process and product-quality issues and implement improvements
  • Demonstrated experience investigating manufacturing or quality issues, performing root cause analysis, and implementing sustainable corrective actions
  • Demonstrated ability to analyze manufacturing and quality data, identify trends and root causes, and translate findings into practical improvement actions
  • Ability to interpret product specifications, test data, manufacturing requirements, technical documentation, and quality standards and apply findings to manufacturing and quality decisions
  • Ability to work effectively across functions and influence improvements without direct supervisory authority
  • Strong analytical, problem-solving, organizational, and communication skills, including the ability to communicate technical findings and recommendations effectively to manufacturing personnel, technical teams, customers, and plant leadership
  • Experience applying statistical, problem-solving, and continuous improvement tools such as SPC, process capability, DOE, FMEA, 8D, 5 Why, Pareto analysis, Lean, Six Sigma, or similar methodologies
  • Experience in textiles, rubber, coatings, chemical processing, converting, or other continuous or process manufacturing environments
  • Experience supporting product or process validation, manufacturing trials, Engineering Change Requests (ECRs), Engineering Change Management, or Management of Change (MOC) processes
  • Working knowledge of textile fibers, yarns, fabric construction, coatings or treatments, and the relationship between material properties, manufacturing processes, and finished-product performance
  • Experience with physical or chemical testing of materials and manufactured products
  • Experience supporting customer or supplier quality investigations
  • Working knowledge of ISO 9001 or a comparable Quality Management System, including internal auditing and corrective-action processes
  • Understanding of Cost of Quality principles, including scrap, rework, waste, and internal and external failure costs
  • Proficiency with Microsoft Excel or similar tools for manufacturing and quality data analysis and reporting
  • Professional certification such as ASQ Certified Quality Engineer (CQE), Six Sigma Green Belt, or equivalent

Required skills

  • 8D Problem Solving, Corrective and Preventive Action, Design of Experiments (DOE), Failure Mode and Effects Analysis (FMEA), ISO 9001, Manufacturing, Microsoft Excel, Process Capability Analysis, Process Engineering, Quality Engineering, Root Cause Analysis, Statistical Process Control (SPC)

Experience

  • Mid level

Job details

Employment type

Full-time

Seniority level

Mid level

Date posted

Nov 19, 2026

Work mode

On-site

Job source

recruiting.ultipro.com

Company

Fenner Dunlop Americas

Customer Service

Conveyor belts for bulk material handling and mining operations

Similar jobs

Matched on role, skills and location · live jobs only

See more Customer Support jobs in Lavonia

Kaleidoscope Innovation

1d ago

New

Senior Quality Engineer

Full-timeOn-siteLafayette, INCompetitive

Kaleidoscope Innovation is seeking a Senior Quality Engineer to support proactive quality assurance and real-time problem-solving in a high-volume manufacturing environment.

Why similarSame roleQuality EngineeringRoot Cause Analysis

Sanmina

1d ago

New

Quality Engineer

Full-timeOn-siteHuntsville, ALCompetitive

SCI Technology, a Sanmina Company, is hiring a Quality Engineer to support quality operations in defense and aerospace manufacturing.

Why similarSame role8D Problem SolvingQuality Engineering

Cirtec Medical

1d ago

New

Sr. Quality Engineer (2nd Shift)

Full-timeOn-siteLowell, MA$100K – $130K/yr

Cirtec Medical manufactures medical device components and finished devices as a contract manufacturing partner.

Why similarSame roleDesign of Experiments (DOE)Quality Engineering

Get new Customer Support jobs in Lavonia by email

Create job alert

Quality Engineer

Fenner Dunlop Americas · Competitive

Apply on company site