← Back to jobsJob ID col-cmwnyt2ma02osd8havqwzy36y

Regal RexnordPosted 1 day ago

Quality Engineer IINew

Full-time
On-site
Mid level
Competitive
Posted 1 day ago

Regal Beloit America, Inc. seeks a Quality Engineer II to teach and empower Boston Gear associates in manufacturing quality techniques and monitor production quality. The role leads efforts to establish and maintain a Total Quality environment, investigate failures, implement corrective actions, provide quality training, and drive continuous improvement.

Posted
1 day ago
Source
regalrexnord.wd1.myworkdayjobs.com
Sector
Sales

Opens the employer's application page in a new tab

Responsibilities

  • Evaluate failures of products and processes and apply appropriate problem-solving techniques to determine root cause and develop lasting solutions. Recommend and implement corrective and preventive actions in response to customer complaints
  • Provide knowledge and instruction on manufacturing quality related topics such as measurement techniques, GD&T, machine setup, process audits, control chart interpretation, etc. Develop and conduct training as required to build quality awareness
  • Interact with suppliers and customers as required and provide professional, accurate and timely information. Complete customer required quality documentation for product acceptance
  • Interface with Engineering and Production to ensure that products are manufactured in accordance with approved processes and prints. Work one on one with operators as needed to instruct on proper machine and tooling setup and use. Assist with both internal and customer quality audits and inspections of operational and supplier programs and processes
  • Establish, maintain and implement processes for gauge calibration, use and upkeep
  • Apply the principles of RBS in accordance with Strategy Deployment. Use facts, data, trends and statistical analysis to drive continuous improvement in the area of geared component production and take appropriate actions to reduce the cost of quality (internal failure, appraisals, etc.)
  • Occasionally travel (5-10%) domestically to customers, vendor or other Regal Rexnord sites, including attendance at off-site meetings, trade show events and professional development conferences or seminars
  • Other duties as assigned by management

Qualifications

  • General machining and geared component manufacturing techniques including machine setup, tooling controls, inspection, troubleshooting etc
  • General knowledge of the operation, calibration and care of measuring instruments
  • Technical drawing interpretation, including GD&T
  • Metrology and inspection techniques
  • Demonstrated problem solving and critical thinking skills, including the ability to collect data, establish facts and draw valid conclusions where limited standardization or information exists
  • Strong organizational skills, to include a demonstrated ability to effectively manage time and multiple priorities simultaneously
  • Attention to detail, accuracy, and striving for excellent outcomes
  • Demonstrated ability to work independently with minimal supervision, be self-directed and self-motivated
  • Highly productive and results-oriented with a strong sense of urgency and discipline to meet task deadlines under time pressure based on business requirements
  • Demonstrated flexibility and willingness to adapt to internal processes and change, delays or unexpected events
  • Demonstrated continuous improvement mindset and an advocate for change
  • Intermediate proficiency with MS Office software applications (Word, Excel, PowerPoint)
  • Demonstrated ability to use statistical software (i.e. Minitab) to analyze numerical data and process behavior
  • Strong verbal and written communication skills, as well as interpersonal skills which foster teamwork and collaboration and develop high-quality working relationships
  • Demonstrated safety orientation and compliance mindset
  • Bachelor's degree in an accredited engineering program or related technical field is required
  • Experience with root cause analysis is required
  • Ability to read and interpret mechanical prints and engineering drawings
  • Six Sigma knowledge

Preferred

  • Knowledge of SAP is preferred
  • Experience working in a manufacturing facility producing geared components in an Engineering, leadership, or mentoring capacity is preferred
  • Experience implementing and/or maintaining ISO-9001, TS16949 or AS9100 certification is desired
  • Experience in internal auditing to ISO-9001 is desired
  • Familiarity and/or training in lean manufacturing principles is preferred
  • SAP experience is preferred

Required skills

GD&TGeared Component ManufacturingISO 9001Inspection TechniquesLean ManufacturingMachiningMeasuring Instrument CalibrationMechanical Drawing InterpretationMetrologyMicrosoft ExcelMicrosoft PowerPointMicrosoft WordMinitabRoot Cause Analysis

Full job description

Regal Beloit America, Inc. seeks a Quality Engineer II to teach and empower Boston Gear associates in manufacturing quality techniques and monitor production quality. The role leads efforts to establish and maintain a Total Quality environment, investigate failures, implement corrective actions, provide quality training, and drive continuous improvement.

Responsibilities

  • Evaluate failures of products and processes and apply appropriate problem-solving techniques to determine root cause and develop lasting solutions. Recommend and implement corrective and preventive actions in response to customer complaints
  • Provide knowledge and instruction on manufacturing quality related topics such as measurement techniques, GD&T, machine setup, process audits, control chart interpretation, etc. Develop and conduct training as required to build quality awareness
  • Interact with suppliers and customers as required and provide professional, accurate and timely information. Complete customer required quality documentation for product acceptance
  • Interface with Engineering and Production to ensure that products are manufactured in accordance with approved processes and prints. Work one on one with operators as needed to instruct on proper machine and tooling setup and use. Assist with both internal and customer quality audits and inspections of operational and supplier programs and processes
  • Establish, maintain and implement processes for gauge calibration, use and upkeep
  • Apply the principles of RBS in accordance with Strategy Deployment. Use facts, data, trends and statistical analysis to drive continuous improvement in the area of geared component production and take appropriate actions to reduce the cost of quality (internal failure, appraisals, etc.)
  • Occasionally travel (5-10%) domestically to customers, vendor or other Regal Rexnord sites, including attendance at off-site meetings, trade show events and professional development conferences or seminars
  • Other duties as assigned by management

Preferred

  • Knowledge of SAP is preferred
  • Experience working in a manufacturing facility producing geared components in an Engineering, leadership, or mentoring capacity is preferred
  • Experience implementing and/or maintaining ISO-9001, TS16949 or AS9100 certification is desired
  • Experience in internal auditing to ISO-9001 is desired
  • Familiarity and/or training in lean manufacturing principles is preferred
  • SAP experience is preferred
  • SAP
  • Geared Components Manufacturing
  • ISO 9001 Certification
  • TS 16949 Certification
  • AS9100 Certification
  • ISO 9001 Auditing
  • Lean Manufacturing
  • Leadership
  • Mentoring

Benefits

  • Medical, Dental, Vision and Prescription Drug Coverage
  • Spending accounts (HSA, Health Care FSA and Dependent Care FSA)
  • Paid Time Off and Holidays
  • 401k Retirement Plan with Matching Employer Contributions
  • Life and Accidental Death & Dismemberment (AD&D) Insurance
  • Paid Leaves
  • Tuition Assistance
  • Fully onsite role, with work performed at your designated Regal Rexnord office

Company

  • Manufacturer of airflow, motion control, and power transmission solutions
  • Milwaukee, Wisconsin, USA
  • https://www.regalrexnord.com/
  • Founded in 1955
  • 10001+ employees

Qualifications

  • General machining and geared component manufacturing techniques including machine setup, tooling controls, inspection, troubleshooting etc
  • General knowledge of the operation, calibration and care of measuring instruments
  • Technical drawing interpretation, including GD&T
  • Metrology and inspection techniques
  • Quality core tools
  • Demonstrated problem solving and critical thinking skills, including the ability to collect data, establish facts and draw valid conclusions where limited standardization or information exists
  • Strong organizational skills, to include a demonstrated ability to effectively manage time and multiple priorities simultaneously
  • Attention to detail, accuracy, and striving for excellent outcomes
  • Demonstrated ability to work independently with minimal supervision, be self-directed and self-motivated
  • Highly productive and results-oriented with a strong sense of urgency and discipline to meet task deadlines under time pressure based on business requirements
  • Demonstrated flexibility and willingness to adapt to internal processes and change, delays or unexpected events
  • Demonstrated continuous improvement mindset and an advocate for change
  • Intermediate proficiency with MS Office software applications (Word, Excel, PowerPoint)
  • Demonstrated ability to use statistical software (i.e. Minitab) to analyze numerical data and process behavior
  • Strong verbal and written communication skills, as well as interpersonal skills which foster teamwork and collaboration and develop high-quality working relationships
  • Demonstrated safety orientation and compliance mindset
  • Bachelor's degree in an accredited engineering program or related technical field is required
  • Experience with root cause analysis is required
  • Ability to read and interpret mechanical prints and engineering drawings
  • Six Sigma knowledge
  • Knowledge of SAP is preferred
  • Experience working in a manufacturing facility producing geared components in an Engineering, leadership, or mentoring capacity is preferred
  • Experience implementing and/or maintaining ISO-9001, TS16949 or AS9100 certification is desired
  • Experience in internal auditing to ISO-9001 is desired
  • Familiarity and/or training in lean manufacturing principles is preferred
  • SAP experience is preferred

Required skills

  • GD&T, Geared Component Manufacturing, ISO 9001, Inspection Techniques, Lean Manufacturing, Machining, Measuring Instrument Calibration, Mechanical Drawing Interpretation, Metrology, Microsoft Excel, Microsoft PowerPoint, Microsoft Word, Minitab, Root Cause Analysis, SAP, Six Sigma, TS 16949

Preferred skills

  • Experience in internal auditing to ISO-9001 is desired, Knowledge of SAP is preferred, SAP experience is preferred

Experience

  • Mid level

Job details

Employment type

Full-time

Seniority level

Mid level

Sector · Sub-sector

Sales · Business Development

Date posted

Nov 19, 2026

Work mode

On-site

Job source

regalrexnord.wd1.myworkdayjobs.com

Company

Regal Rexnord

Sales

Manufacturer of airflow, motion control, and power transmission solutions

See all 3 jobs from Regal Rexnord →

Similar jobs

Matched on role, skills and location · live jobs only

See more Business Development jobs in Union Grove

Lozier Corporation

3d ago

Supplier Quality Engineer

Full-timeOn-siteOmaha, NECompetitive

Lozier hires a Supplier Quality Engineer to ensure suppliers meet company, customer, and industry quality requirements.

Why similarSame roleISO 9001Lean Manufacturing

Forj Medical

4d ago

Senior Quality Engineer

Full-timeOn-siteSaint Paul, MN$100K – $125K/yr

Forj Medical is hiring a Senior Quality Engineer to support quality systems and production operations for medical device components and finished devices.

Why similarSame roleMicrosoft ExcelMicrosoft PowerPoint

Ensign-Bickford Aerospace & Defense Company (EBAD)

4d ago

Senior Quality Engineer

Full-timeOn-siteSimsbury, CT$115K – $135K/yr

Responsibilities Supports the assigned areas and Quality Engineering Lead with activities to achieve SQDC, NCR, CAPA, and COPQ performance targets Mentors QEs with assigned programs from proposal through shipment to customer while complying with customer…

Why similarSame roleISO 9001Lean Manufacturing

Get new Business Development jobs in Union Grove by email

Create job alert

Quality Engineer II

Regal Rexnord · Competitive

Apply on company site