← Back to jobsJob ID col-cmwnyux3u02rnd8hawjzkbv9d

Atlas Copco GroupPosted 1 day ago

Manufacturing EngineerNew

Full-time
On-site
3+ years
Competitive
Posted 1 day ago

Atlas Copco Compressors LLC is hiring a Manufacturing Engineer for its Air & Gas Applications division. The role improves manufacturing efficiency and equipment reliability, provides operational support, and leads continuous-improvement initiatives. It also partners with quality, maintenance, planning, and production teams to address process risks, compliance, and root causes.

Posted
1 day ago
Source
jobs.atlascopcogroup.com
Sector
Production/Manufacturing

Opens the employer's application page in a new tab

Responsibilities

  • Lead complex root-cause analyses for production downtime, scrap reduction, and bottleneck resolutions using methodologies such as 5 Whys, Fishbone Diagrams, and 8D problem-solving, ensuring effective Corrective and Preventive Actions (CAPA)
  • Drive implementation of Lean Manufacturing and Six Sigma principles alongside Statistical Process Control (SPC) to optimize production flow, minimize waste, and reduce process variability
  • Manage inventory of critical components including spare parts, precision measurement instruments, and raw materials to prevent stock shortages that could disrupt production and maintenance schedules
  • Maintain strict adherence to documented procedures and quality management systems, supporting both internal audits and vendor inspections to uphold certification and compliance standards
  • Thoroughly analyze manufacturing and quality data to identify performance trends, risk factors, and potential areas for process enhancements
  • Serve as a liaison between operations, maintenance, and quality teams, coordinating on issues related to non-conforming materials through the Material Review Board (MRB) and driving cross-departmental solutions
  • Monitor key production metrics such as scrap rates, first-pass yields, and rolled throughput yield (RTY), using insights to spearhead continuous improvement projects
  • Lead and manage engineering projects that encompass equipment upgrades, process validations, and commissioning, ensuring comprehensive First-Article Inspections (FAI) are conducted before production ramp-up
  • Support Management of Change (MOC) protocols to ensure engineering modifications comply with safety, quality, and operational standards
  • Engage proactively in Safety, Health, Environment, and Quality (SHEQ) activities, promoting and enforcing adherence to safety regulations, procedures such as Job Safety Analyses (JSA), Process Hazard Analyses (PHA), and Lockout/Tagout (LOTO)
  • Conduct timely troubleshooting of mechanical failures, process abnormalities, dimensional inconsistencies, and automation issues encountered during production
  • Prepare and maintain detailed technical documentation, including Standard Operating Procedures (SOPs), Control Plans, Corrective Action Requests (CARs), and engineering change orders
  • Develop and update Design and Process Failure Modes and Effects Analyses (DFMEA/PFMEA) to proactively mitigate risks, enhance process stability, and reduce defect rates
  • Oversee calibration schedules, maintenance logs, and equipment performance monitoring to ensure reliability and maintain operational readiness
  • Provide training and guidance to production personnel to uphold quality assurance methodologies and foster sustainable operational excellence

Qualifications

  • Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a closely related STEM field
  • A minimum of three years demonstrated success in manufacturing or production engineering environments, with a strong focus on process improvement and operational excellence
  • Proficiency in interpreting and applying complex technical drawings, schematics, and engineering documentation to manufacturing processes
  • Exceptional analytical capability leveraging structured problem-solving techniques to address production challenges and optimize workflows
  • Hands-on experience with Lean Manufacturing principles, Six Sigma methodologies, and Statistical Process Control (SPC) tools
  • Solid mechanical aptitude and familiarity with precision measurement devices, troubleshooting, and calibration procedures
  • Competence in data analysis and reporting using Excel (pivot tables, formulas), business intelligence dashboards, and enterprise resource planning (ERP) systems
  • Meticulous attention to detail with an ability to detect variations, deviations, and potential process risks proactively
  • Ability to thrive in dynamic, fast-paced production settings, managing multiple priorities efficiently and effectively
  • Strong interpersonal and communication skills to engage and collaborate across departments including operations, quality, and maintenance teams
  • Knowledge of industrial safety standards, including experience with Lockout/Tagout (LOTO) procedures and general workplace safety awareness

Preferred

  • Six Sigma methodologies (Green Belt or higher preferred)
  • Six Sigma Green Belt

Required skills

Calibration ProceduresLean ManufacturingLockout/Tagout (LOTO)Precision MeasurementSix SigmaStatistical Process Control (SPC)Technical Drawing Interpretation

Full job description

Atlas Copco Compressors LLC is hiring a Manufacturing Engineer for its Air & Gas Applications division. The role improves manufacturing efficiency and equipment reliability, provides operational support, and leads continuous-improvement initiatives. It also partners with quality, maintenance, planning, and production teams to address process risks, compliance, and root causes.

Responsibilities

  • Lead complex root-cause analyses for production downtime, scrap reduction, and bottleneck resolutions using methodologies such as 5 Whys, Fishbone Diagrams, and 8D problem-solving, ensuring effective Corrective and Preventive Actions (CAPA)
  • Drive implementation of Lean Manufacturing and Six Sigma principles alongside Statistical Process Control (SPC) to optimize production flow, minimize waste, and reduce process variability
  • Manage inventory of critical components including spare parts, precision measurement instruments, and raw materials to prevent stock shortages that could disrupt production and maintenance schedules
  • Maintain strict adherence to documented procedures and quality management systems, supporting both internal audits and vendor inspections to uphold certification and compliance standards
  • Thoroughly analyze manufacturing and quality data to identify performance trends, risk factors, and potential areas for process enhancements
  • Serve as a liaison between operations, maintenance, and quality teams, coordinating on issues related to non-conforming materials through the Material Review Board (MRB) and driving cross-departmental solutions
  • Monitor key production metrics such as scrap rates, first-pass yields, and rolled throughput yield (RTY), using insights to spearhead continuous improvement projects
  • Lead and manage engineering projects that encompass equipment upgrades, process validations, and commissioning, ensuring comprehensive First-Article Inspections (FAI) are conducted before production ramp-up
  • Support Management of Change (MOC) protocols to ensure engineering modifications comply with safety, quality, and operational standards
  • Engage proactively in Safety, Health, Environment, and Quality (SHEQ) activities, promoting and enforcing adherence to safety regulations, procedures such as Job Safety Analyses (JSA), Process Hazard Analyses (PHA), and Lockout/Tagout (LOTO)
  • Conduct timely troubleshooting of mechanical failures, process abnormalities, dimensional inconsistencies, and automation issues encountered during production
  • Prepare and maintain detailed technical documentation, including Standard Operating Procedures (SOPs), Control Plans, Corrective Action Requests (CARs), and engineering change orders
  • Develop and update Design and Process Failure Modes and Effects Analyses (DFMEA/PFMEA) to proactively mitigate risks, enhance process stability, and reduce defect rates
  • Oversee calibration schedules, maintenance logs, and equipment performance monitoring to ensure reliability and maintain operational readiness
  • Provide training and guidance to production personnel to uphold quality assurance methodologies and foster sustainable operational excellence

Preferred

  • Six Sigma methodologies (Green Belt or higher preferred)
  • Six Sigma Methodologies
  • Six Sigma Green Belt

Benefits

  • Performance-based incentives
  • Professional development programs
  • Career advancement opportunities
  • Health and wellness plans
  • Work-life balance initiatives
  • A workplace that embraces flexible approaches to work and leadership
  • A culture of mutual learning

Company

  • Industrial compressed air, vacuum, pump, tool, and automation solutions
  • Stockholm, Stockholms Lan, SWE
  • https://www.atlascopcogroup.com/
  • Founded in 1873
  • 10001+ employees

Qualifications

  • Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or a closely related STEM field
  • A minimum of three years demonstrated success in manufacturing or production engineering environments, with a strong focus on process improvement and operational excellence
  • Proficiency in interpreting and applying complex technical drawings, schematics, and engineering documentation to manufacturing processes
  • Exceptional analytical capability leveraging structured problem-solving techniques to address production challenges and optimize workflows
  • Hands-on experience with Lean Manufacturing principles, Six Sigma methodologies, and Statistical Process Control (SPC) tools
  • Solid mechanical aptitude and familiarity with precision measurement devices, troubleshooting, and calibration procedures
  • Competence in data analysis and reporting using Excel (pivot tables, formulas), business intelligence dashboards, and enterprise resource planning (ERP) systems
  • Meticulous attention to detail with an ability to detect variations, deviations, and potential process risks proactively
  • Ability to thrive in dynamic, fast-paced production settings, managing multiple priorities efficiently and effectively
  • Strong interpersonal and communication skills to engage and collaborate across departments including operations, quality, and maintenance teams
  • Knowledge of industrial safety standards, including experience with Lockout/Tagout (LOTO) procedures and general workplace safety awareness
  • Six Sigma methodologies (Green Belt or higher preferred)
  • A minimum of three years demonstrated success in manufacturing or production engineering environments, with a strong focus on process improvement and operational excellence.

Required skills

  • Calibration Procedures, Lean Manufacturing, Lockout/Tagout (LOTO), Precision Measurement, Six Sigma, Statistical Process Control (SPC), Technical Drawing Interpretation

Preferred skills

  • Six Sigma methodologies (Green Belt or higher preferred)

Experience

  • 3+ years

Job details

Employment type

Full-time

Seniority level

3+ years

Date posted

Nov 19, 2026

Work mode

On-site

Job source

jobs.atlascopcogroup.com

Company

Atlas Copco Group

Production/Manufacturing

Industrial compressed air, vacuum, pump, tool, and automation solutions

Similar jobs

Matched on role, skills and location · live jobs only

See more Manufacturing Engineer jobs in Houston

Danaher

1d ago

New

Manufacturing Engineer

Full-timeOn-siteSan Jose, CA$83K – $146K/yr

Beckman Coulter, Inc. is hiring a Manufacturing Engineer to optimize and sustain manufacturing processes and improve production performance.

Why similarSame roleLean ManufacturingSix Sigma

Consumer Goods

1d ago

New

Senior Manufacturing Quality Engineer

Full-timeOn-siteLaFayette, GACompetitive

Roper Corporation, Inc. seeks a Senior Manufacturing Quality Engineer to improve manufacturing quality, product and process reliability, and operational performance at its LaFayette plant.

Why similarSame roleLean ManufacturingSix Sigma

Kirby

2d ago

New

Manufacturing Supplier Quality Control Engineer

Full-timeOn-siteHouston, TXCompetitive

United Holdings is hiring a Manufacturing Supplier Quality Control Engineer to ensure supplier quality compliance for sourced materials and components.

Why similarSame roleSix SigmaHouston

Get new Manufacturing Engineer jobs in Houston by email

Create job alert

Manufacturing Engineer

Atlas Copco Group · Competitive

Apply on company site