← Back to jobsJob ID col-cmwo1dqho058pd8hallm0wwzf

Johnson & JohnsonPosted 2 days ago

Senior QA Specialist - C&QNew

Full-time
On-site
4–6 years
Competitive
Posted 2 days ago

Johnson & Johnson is hiring a Senior QA Specialist - C&Q for its new biotherapeutics manufacturing facility in Wilson, North Carolina. The role provides quality assurance oversight of commissioning, qualification, validation, aseptic processing, and operational readiness while supporting regulatory compliance and the facility’s quality management system.

Posted
2 days ago
Source
jj.wd5.myworkdayjobs.com
Sector
Production/Manufacturing

Opens the employer's application page in a new tab

Responsibilities

  • Represents Quality Assurance on qualification teams and provides QA oversight of C&Q and validation execution across the capital project lifecycle—user requirements, design review, construction, FAT/SAT, commissioning, qualification and handover—including leveraging commissioning (Good Engineering Practice) documentation into qualification per ASTM E2500 and the ISPE Baseline Guide Vol. 5 (2nd Ed.), in compliance with GMP, FDA, EMA and other regulatory requirements
  • Supports the development and maintenance of the site validation program, Validation Master Plan, and project C&Q and validation plans, ensuring alignment with regulatory and corporate requirements and with project timelines and deliverables
  • Participates in risk assessments (e.g., FMEA, HACCP, HAZOP, ICH Q9(R1) quality risk management, and CARA) for equipment, utilities and systems; performs QA review of system impact assessments and equipment/utility categorization; helps define critical aspects and critical design elements; and reviews requirements traceability matrices
  • Reviews and approves commissioning and qualification documentation, including User Requirements Specifications (URS), FAT/SAT documentation, and Installation, Operational and Performance Qualification (IQ/OQ/PQ) protocols and reports, as well as validation protocols and reports (analytical, cleaning, process, sterilization, etc.)
  • Ensures Good Documentation Practice and data integrity of vendor, EPCM and CQV contractor documentation leveraged as Good Engineering Practice evidence in qualification
  • Provides QA oversight of sterilization and decontamination qualification, including autoclave and SIP cycles, E-beam irradiation, and vaporized hydrogen peroxide (VHP) decontamination cycle development with biological indicators
  • Provides QA oversight of aseptic process simulations (media fills), sterile filtration and filter validation (including PUPSIT), cleanroom classification, airflow visualization (smoke) studies, and environmental monitoring performance qualification
  • Provides QA oversight of visual inspection qualification, including defect libraries and manual-versus-automated inspection comparison studies
  • Reviews and approves single-use system qualification, including evaluation of supplier documentation and extractables/leachables assessments
  • Supports development and implementation of the site Contamination Control Strategy (CCS) in alignment with EU GMP Annex 1
  • Provides QA oversight of utility and facility qualification, including water for injection (WFI) and clean steam (including phased water system PQ), process gases, and HVAC
  • Reviews and approves temperature mapping of cold storage and controlled-temperature equipment and areas (e.g., refrigerators, freezers, cold rooms)
  • Reviews turnover packages and manages QA disposition of punch-list items, discrepancies and qualification readiness prior to system handover
  • Supports QA set-up of the calibration and preventive maintenance programs, including onboarding of qualified assets
  • Acts as the QA point of contact for deviations, CAPAs and change controls related to C&Q and validation activities
  • Supports process performance qualification (PPQ), pre-approval/pre-license inspection readiness, and the BLA/sBLA licensure path for the new facility
  • Reviews and approves Technology Transfer documents, ensuring they meet regulatory and J&J requirements
  • Supports the transition from C&Q into the ongoing validation lifecycle, including periodic review and requalification
  • Provides QA support and direction to project, engineering and C&Q teams on specific quality system elements to ensure business, quality and compliance goals are met following J&J Standards
  • Develops and implements C&Q and validation processes, procedures, forms, work instructions and tools in support of standing up the site quality management system and validation program
  • Collaborates with cross-functional teams (Operations, Engineering & Maintenance, Validation, Automation, MSAT, QC, etc.) and external partners (EPCM firms, CQV contractors and equipment vendors) to address quality issues and ensure compliance systems are implemented efficiently
  • Reviews and approves standard operating procedures (SOPs), work instructions and quality management system documents to ensure accuracy and compliance
  • Recommends process improvements to enhance compliance and efficiency in C&Q and validation activities

Qualifications

  • Bachelor's degree in a scientific or engineering discipline with a minimum of six (6) years of experience, or a Master's degree with a minimum of four (4) years of experience, within the biological and/or pharmaceutical industry
  • QA or validation experience on C&Q projects for sterile/aseptic drug product manufacturing equipment (e.g., fill-finish of parenteral products)
  • Hands-on experience with the qualification/validation lifecycle (URS, CARA, FAT, SAT, IQ, OQ, PQ) and cleaning/process validation, including reviewing and approving protocols and reports
  • Strong understanding of cGMP (21 CFR 210/211 and 600s), and FDA, EMA and ICH guidelines (including ICH Q9(R1) and Q10)
  • Working knowledge of EU GMP Annex 1 (2022), including the Contamination Control Strategy, EU GMP Annex 15, and the FDA 2004 Guidance for Sterile Drug Products Produced by Aseptic Processing
  • Familiarity with industry standards and guidance for risk-based C&Q and validation lifecycle principles, including ASTM E2500 and the ISPE Baseline Guide Vol. 5 (2nd Ed.) and GAMP 5 (2nd Ed.)
  • Working knowledge of computerized system validation (CSV/CSA), 21 CFR Part 11, EU Annex 11 and data integrity (ALCOA+) principles
  • Strong understanding of risk-based approaches to commissioning and qualification/validation, with proficiency in risk management methodologies such as FMEA, HACCP, HAZOP and ICH Q9(R1) quality risk management
  • Proficiency in technical writing for validation and quality documents
  • An unquestionable level of integrity and commitment to operating ethically and within the boundaries of regulatory requirements
  • Exercises sound, detail-oriented, risk-based QA judgment—holding firm on product quality and patient safety requirements while enabling schedule through pragmatic, right-first-time solutions
  • Thrives in ambiguity and a fast-paced start-up environment; builds processes from the ground up and manages multiple, shifting priorities and deadlines independently with minimal supervision
  • Excellent communication and relationship-building skills, with the ability to influence cross-functional teams, contractors and vendors without direct authority and to interact effectively with all levels of the organization

Preferred

  • Proven expertise as a Subject Matter Expert in C&Q for regulated industries
  • Experience supporting a greenfield or start-up sterile manufacturing facility through C&Q, handover and licensure
  • Hands-on QA experience with isolator filling lines and automated systems for visual inspection, device assembly, and secondary/tertiary packaging
  • Working knowledge of ISO 14644 (cleanrooms), USP / (visual inspection) and relevant PDA Technical Reports (e.g., TR 1, TR 22, TR 26)
  • Experience with paperless validation platforms (e.g., Kneat)
  • Experience supporting regulatory inspections, including pre-approval or pre-license inspections
  • ASQ certification (e.g., CQA, CQE) and/or active involvement in ISPE
  • Qualification (C&Q)
  • Certified Quality Auditor (CQA)
  • Certified Quality Engineer (CQE)

Required skills

ASTM E2500Cleaning and Process ValidationData Integrity (ALCOA+)FMEA, HACCP, and HAZOPGAMP 5Validation Lifecycle CARAValidation Lifecycle FATValidation Lifecycle IQValidation Lifecycle OQValidation Lifecycle PQValidation Lifecycle SATValidation Lifecycle URScGMP 21 CFR 210/211cGMP 600s

Full job description

Johnson & Johnson is hiring a Senior QA Specialist - C&Q for its new biotherapeutics manufacturing facility in Wilson, North Carolina. The role provides quality assurance oversight of commissioning, qualification, validation, aseptic processing, and operational readiness while supporting regulatory compliance and the facility’s quality management system.

Responsibilities

  • Represents Quality Assurance on qualification teams and provides QA oversight of C&Q and validation execution across the capital project lifecycle—user requirements, design review, construction, FAT/SAT, commissioning, qualification and handover—including leveraging commissioning (Good Engineering Practice) documentation into qualification per ASTM E2500 and the ISPE Baseline Guide Vol. 5 (2nd Ed.), in compliance with GMP, FDA, EMA and other regulatory requirements
  • Supports the development and maintenance of the site validation program, Validation Master Plan, and project C&Q and validation plans, ensuring alignment with regulatory and corporate requirements and with project timelines and deliverables
  • Participates in risk assessments (e.g., FMEA, HACCP, HAZOP, ICH Q9(R1) quality risk management, and CARA) for equipment, utilities and systems; performs QA review of system impact assessments and equipment/utility categorization; helps define critical aspects and critical design elements; and reviews requirements traceability matrices
  • Reviews and approves commissioning and qualification documentation, including User Requirements Specifications (URS), FAT/SAT documentation, and Installation, Operational and Performance Qualification (IQ/OQ/PQ) protocols and reports, as well as validation protocols and reports (analytical, cleaning, process, sterilization, etc.)
  • Ensures Good Documentation Practice and data integrity of vendor, EPCM and CQV contractor documentation leveraged as Good Engineering Practice evidence in qualification
  • Provides QA oversight of sterilization and decontamination qualification, including autoclave and SIP cycles, E-beam irradiation, and vaporized hydrogen peroxide (VHP) decontamination cycle development with biological indicators
  • Provides QA oversight of aseptic process simulations (media fills), sterile filtration and filter validation (including PUPSIT), cleanroom classification, airflow visualization (smoke) studies, and environmental monitoring performance qualification
  • Provides QA oversight of visual inspection qualification, including defect libraries and manual-versus-automated inspection comparison studies
  • Reviews and approves single-use system qualification, including evaluation of supplier documentation and extractables/leachables assessments
  • Supports development and implementation of the site Contamination Control Strategy (CCS) in alignment with EU GMP Annex 1
  • Provides QA oversight of utility and facility qualification, including water for injection (WFI) and clean steam (including phased water system PQ), process gases, and HVAC
  • Reviews and approves temperature mapping of cold storage and controlled-temperature equipment and areas (e.g., refrigerators, freezers, cold rooms)
  • Reviews turnover packages and manages QA disposition of punch-list items, discrepancies and qualification readiness prior to system handover
  • Supports QA set-up of the calibration and preventive maintenance programs, including onboarding of qualified assets
  • Acts as the QA point of contact for deviations, CAPAs and change controls related to C&Q and validation activities
  • Supports process performance qualification (PPQ), pre-approval/pre-license inspection readiness, and the BLA/sBLA licensure path for the new facility
  • Reviews and approves Technology Transfer documents, ensuring they meet regulatory and J&J requirements
  • Supports the transition from C&Q into the ongoing validation lifecycle, including periodic review and requalification
  • Provides QA support and direction to project, engineering and C&Q teams on specific quality system elements to ensure business, quality and compliance goals are met following J&J Standards
  • Develops and implements C&Q and validation processes, procedures, forms, work instructions and tools in support of standing up the site quality management system and validation program
  • Collaborates with cross-functional teams (Operations, Engineering & Maintenance, Validation, Automation, MSAT, QC, etc.) and external partners (EPCM firms, CQV contractors and equipment vendors) to address quality issues and ensure compliance systems are implemented efficiently
  • Reviews and approves standard operating procedures (SOPs), work instructions and quality management system documents to ensure accuracy and compliance
  • Recommends process improvements to enhance compliance and efficiency in C&Q and validation activities

Preferred

  • Proven expertise as a Subject Matter Expert in C&Q for regulated industries
  • Experience supporting a greenfield or start-up sterile manufacturing facility through C&Q, handover and licensure
  • Hands-on QA experience with isolator filling lines and automated systems for visual inspection, device assembly, and secondary/tertiary packaging
  • Working knowledge of ISO 14644 (cleanrooms), USP / (visual inspection) and relevant PDA Technical Reports (e.g., TR 1, TR 22, TR 26)
  • Experience with paperless validation platforms (e.g., Kneat)
  • Experience supporting regulatory inspections, including pre-approval or pre-license inspections
  • ASQ certification (e.g., CQA, CQE) and/or active involvement in ISPE
  • Commissioning
  • Qualification (C&Q)
  • Sterile Manufacturing
  • Greenfield Facility Start-Up
  • Facility Handover
  • Facility Licensure
  • Quality Assurance
  • Isolator Filling Lines
  • Automated Visual Inspection
  • Device Assembly
  • Secondary
  • Tertiary Packaging
  • ISO 14644
  • USP /
  • PDA Technical Reports
  • Paperless Validation Platforms
  • Kneat
  • Regulatory Inspection Support
  • Pre-Approval Inspections
  • Pre-License Inspections
  • ASQ Certification
  • Certified Quality Auditor (CQA)
  • Certified Quality Engineer (CQE)
  • ISPE Involvement

Company

  • Healthcare innovation, pharmaceuticals, and medical technology
  • New Brunswick, New Jersey, USA
  • http://www.jnj.com/
  • Founded in 1886
  • 10001+ employees

Qualifications

  • Bachelor's degree in a scientific or engineering discipline with a minimum of six (6) years of experience, or a Master's degree with a minimum of four (4) years of experience, within the biological and/or pharmaceutical industry
  • QA or validation experience on C&Q projects for sterile/aseptic drug product manufacturing equipment (e.g., fill-finish of parenteral products)
  • Hands-on experience with the qualification/validation lifecycle (URS, CARA, FAT, SAT, IQ, OQ, PQ) and cleaning/process validation, including reviewing and approving protocols and reports
  • Strong understanding of cGMP (21 CFR 210/211 and 600s), and FDA, EMA and ICH guidelines (including ICH Q9(R1) and Q10)
  • Working knowledge of EU GMP Annex 1 (2022), including the Contamination Control Strategy, EU GMP Annex 15, and the FDA 2004 Guidance for Sterile Drug Products Produced by Aseptic Processing
  • Familiarity with industry standards and guidance for risk-based C&Q and validation lifecycle principles, including ASTM E2500 and the ISPE Baseline Guide Vol. 5 (2nd Ed.) and GAMP 5 (2nd Ed.)
  • Working knowledge of computerized system validation (CSV/CSA), 21 CFR Part 11, EU Annex 11 and data integrity (ALCOA+) principles
  • Strong understanding of risk-based approaches to commissioning and qualification/validation, with proficiency in risk management methodologies such as FMEA, HACCP, HAZOP and ICH Q9(R1) quality risk management
  • Proficiency in technical writing for validation and quality documents
  • An unquestionable level of integrity and commitment to operating ethically and within the boundaries of regulatory requirements
  • Exercises sound, detail-oriented, risk-based QA judgment—holding firm on product quality and patient safety requirements while enabling schedule through pragmatic, right-first-time solutions
  • Thrives in ambiguity and a fast-paced start-up environment; builds processes from the ground up and manages multiple, shifting priorities and deadlines independently with minimal supervision
  • Excellent communication and relationship-building skills, with the ability to influence cross-functional teams, contractors and vendors without direct authority and to interact effectively with all levels of the organization
  • Proven expertise as a Subject Matter Expert in C&Q for regulated industries
  • Experience supporting a greenfield or start-up sterile manufacturing facility through C&Q, handover and licensure
  • Hands-on QA experience with isolator filling lines and automated systems for visual inspection, device assembly, and secondary/tertiary packaging
  • Working knowledge of ISO 14644 (cleanrooms), USP / (visual inspection) and relevant PDA Technical Reports (e.g., TR 1, TR 22, TR 26)
  • Experience with paperless validation platforms (e.g., Kneat)
  • Experience supporting regulatory inspections, including pre-approval or pre-license inspections
  • ASQ certification (e.g., CQA, CQE) and/or active involvement in ISPE
  • Bachelor's degree in a scientific or engineering discipline with a minimum of six (6) years of experience, or a Master's degree with a minimum of four (4) years of experience, within the biological and/or pharmaceutical industry.

Required skills

  • 21 CFR Part 11 and EU Annex 11, ASTM E2500, Cleaning and Process Validation, Commissioning and Qualification (C&Q), Computerized System Validation (CSV/CSA), Data Integrity (ALCOA+), EU GMP Annex 1 and Annex 15, FDA, EMA, and ICH Guidelines, FMEA, HACCP, and HAZOP, GAMP 5, ISPE Baseline Guide Vol. 5, Sterile/Aseptic Drug Product Manufacturing, Validation Lifecycle CARA, Validation Lifecycle FAT, Validation Lifecycle IQ, Validation Lifecycle OQ, Validation Lifecycle PQ, Validation Lifecycle SAT, Validation Lifecycle URS, cGMP 21 CFR 210/211, cGMP 600s

Preferred skills

  • Experience with paperless validation platforms (e.g., Kneat)

Experience

  • 4-6 years

Job details

Employment type

Full-time

Seniority level

4–6 years

Date posted

Nov 19, 2026

Work mode

On-site

Job source

jj.wd5.myworkdayjobs.com

Company

Johnson & Johnson

Production/Manufacturing

Healthcare innovation, pharmaceuticals, and medical technology

See all 7 jobs from Johnson & Johnson →
  • New Brunswick, New Jersey, USA
  • Production/Manufacturing
  • 10001+ employees
  • Founded 1886
  • jnj.com

Similar jobs

Matched on role, skills and location · live jobs only

See more Quality Assurance Specialist jobs in Wilson

KBI Biopharma

3d ago

QA Specialist II (2-2-3 Rotation 12-hour Night Shift)

Full-timeOn-siteDurham, NCCompetitive

KBI Biopharma, Inc. is hiring a Manufacturing Quality Assurance Specialist II to support manufacturing processes and areas in a GMP contract manufacturing environment.

Why similarSame roleDurham

PCI Pharma Services

2d ago

New

Qa Specialist Ii - Ops

Full-timeOn-siteBedford, NHCompetitive

PCI Pharma Services provides quality and compliance support for life-changing biopharmaceutical therapies and their patients.

Why similarSame role

Bristol Myers Squibb

2d ago

New

QA Shop Floor Specialist

Full-timeOn-siteWarren, NJCompetitive

Bristol Myers Squibb is hiring a QA Shop Floor Specialist to provide quality oversight for Cell Therapy Development Operations and clinical manufacturing activities.

Why similarSame role

Get new Quality Assurance Specialist jobs in Wilson by email

Create job alert

Senior QA Specialist - C&Q

Johnson & Johnson · Competitive

Apply on company site